Hydraulic System Oil Sample - Obtain
Show/hide table
Illustration 1 | g01183311 |
301.6C and 301.8C |
Show/hide table
Illustration 2 | g01183314 |
302.5C |
Obtain a sample of the hydraulic oil from the hydraulic oil sampling valve. The hydraulic oil sampling valve is located on the hydraulic oil tank. Refer to Special Publication, SEBU6250, "S·O·S Oil Analysis" for information that pertains to obtaining a sample of the hydraulic oil. Refer to Special Publication, PEHP6001, "How To Take A Good Oil Sample" for more information about obtaining a sample of the hydraulic oil.
Caterpillar Information System:
325C LCR Excavator Machine Systems Swing Cushion Valve - Assemble
325C LCR Excavator Machine Systems Swing Cushion Valve - Disassemble
325C LCR Excavator Machine Systems Swing Cushion Valve - Install
325C LCR Excavator Machine Systems Swing Cushion Valve - Remove
330D and 336D Excavators Safety Messages
325C LCR Excavator Machine Systems Refrigerant Receiver-Dryer - Remove and Install
325C Excavator Engine Supplement Unit Injector Hydraulic Pump Drive - Install
325C Excavator Engine Supplement Unit Injector Hydraulic Pump Drive - Remove
325C Excavator Engine Supplement Fuel Transfer Pump and Primary Filter (Water Separator) - Remove and Install
325C Excavator Engine Supplement Engine Electronic Control - Remove and Install
M318C and M322C Excavators Engine Supplement Alternator - Remove and Install
325C Excavator Engine Supplement Inlet Manifold - Remove and Install
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Temperature Sensor (Torque Converter Oil)
325C LCR Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate
325C LCR Excavator Machine Systems Upper Frame and Undercarriage Frame - Connect
C9.3 Engines for Caterpillar Built Machines Vibration Damper - Check
325C LCR Excavator Machine Systems Swing Motor and Swing Drive - Remove
M318C and M322C Excavators Engine Supplement Engine - Remove
M318C and M322C Excavators Engine Supplement Engine - Install
325C LCR Excavator Machine Systems Swing Motor and Swing Drive - Install
325C LCR Excavator Machine Systems Swing Motor - Remove
325C LCR Excavator Machine Systems Swing Motor - Install
345C MHPU Mobile Hydraulic Power Unit Specifications - Ultrahigh Demolition Configuration
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}