Fuel Tank - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7573 | Link Bracket | 4 |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
- Remove box assembly (2). Remove panels (1) and (3) .
Show/hide table
 | |
| Illustration 1 | g01162848 |
- Remove panel (4) and bracket (5) .
Show/hide table
 | |
| Illustration 2 | g01162849 |
- Disconnect hose (6), clip (7), and harness assembly (8) .
Show/hide table
 | |
| Illustration 3 | g01162850 |
- Remove panel (9) .
Show/hide table
 | |
| Illustration 4 | g01162851 |
- Remove brackets (10) and (11) .
Show/hide table
 | |
| Illustration 5 | g01162852 |
- Remove cover (12) .
Show/hide table
 | |
| Illustration 6 | g01162853 |
- Turn valve (13) to the off position. Disconnect hose (14) .
Show/hide table
 | |
| Illustration 7 | g01162854 |
- Attach Tooling (A) and a suitable lifting device to tank assembly (15). The weight of tank assembly (15) is approximately 77 kg (170 lb). Remove bolts (16) and tank assembly (15) .
Show/hide table
 | |
| Illustration 8 | g01162855 |
Show/hide table
 | |
| Illustration 9 | g01162856 |
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7573 | Link Bracket | 4 |
- Attach Tooling (A) and a suitable lifting device to tank assembly (15). The weight of tank assembly (15) is approximately 77 kg (170 lb). Position tank assembly (15) and install bolts (16) .
Show/hide table
| | |
| Illustration 10 | g01162855 |
Show/hide table
| | |
| Illustration 11 | g01162856 |
- Connect hose (14). Turn valve (13) to the on position.
Show/hide table
| | |
| Illustration 12 | g01162854 |
- Install cover (12) .
Show/hide table
| | |
| Illustration 13 | g01162853 |
- Install brackets (11) and (10) .
Show/hide table
| | |
| Illustration 14 | g01162852 |
- Install panel (9) .
Show/hide table
| | |
| Illustration 15 | g01162851 |
- Connect harness assembly (8), clip (7), and hose (6) .
Show/hide table
| | |
| Illustration 16 | g01162850 |
- Install bracket (5) and panel (4) .
Show/hide table
| | |
| Illustration 17 | g01162849 |
- Install panels (3) and (1). Install box assembly (2) .
Show/hide table
| | |
| Illustration 18 | g01162848 |
Caterpillar Information System:
C15 and C18 Petroleum Generator Sets After Stopping Engine
305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Install
2005/06/06 An Improved Exhaust Manifold Is Available {1059}
C11 and C15 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
2006/10/30 Using Injector Trim Files {1290, 7620}
C11 and C15 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines CAN Data Link Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Work Tool Control
C32 Petroleum Generator Sets Engine Crankcase Breather - Clean
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Fuses - Replace
305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Remove
C7 Engines for Caterpillar Built Machines Piston and Rings
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Carrier Roller - Remove and Install
C4.4 Industrial Engine Fire Prevention and Explosion Prevention
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Roller - Remove and Install
C4.4 Industrial Engine Engine Stopping
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Remove
Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7 Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Install
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track - Separate
2005/05/16 Service Replacement Relay is now Available {4493}
312C Excavator Machine System Specifications Recoil Spring
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Backhoe - Lubricate