Engine Oil Pressure Switch
Show/hide table
| |
| Illustration 1 | g00904803 |
Tighten the engine oil pressure switch to the following torque. ...
Note: The engine oil pressure switch can be found in two positions.
(1) Engine oil pressure switch that is located on the valve mechanism cover
- Pressure rating for the (Amp) Brown connector ...
29.4 kPa (4.26 psi)
(2) Engine oil pressure switch that is located on the cylinder block
- Pressure rating for the (Amp) Blue connector ...
98 kPa (14.21 psi)
- Pressure rating for the (Amp) Black connector ...
68.9 kPa (10.0 psi)
Caterpillar Information System:
C2.2 Engine and C1.5 Generator Set Piston Ring Groove - Inspect
C2.2 Engine Gear Group (Front)
C2.2 Engine Piston and Rings
C2.2 Engine Connecting Rod Bearing Journal
C2.2 Engine Crankshaft
C2.2 Engine Water Temperature Regulator
C2.2 Engine and C1.5 Generator Set Engine Valve Lash - Inspect/Adjust
C2.2 Engine Engine Oil Relief Valve
C2.2 Engine Exhaust Manifold
C2.2 Engine Cylinder Head
3500 Engines High Altitude Derate
C2.2 Engine Cylinder Head Valves
C2.2 Engine Glow Plugs
C2.2 Engine and C1.5 Generator Set Cylinder Head - Inspect
2005/10/10 A New Fuel Level Switch Is Now Being Used {1435, 7481}
C2.2 Engine and C1.5 Generator Set Glow Plugs - Test
C2.2 Engine Fuel Injection Timing - Check
C2.2 Engine Engine Valve Lash - Inspect/Adjust
2006/10/30 Using Injector Trim Files {1290, 7620}
2006/10/30 Using Injector Trim Files {1251, 7620}
C7 On-highway Engine Belt Tensioner
C3.3 and C4.4 Generator Sets Crankshaft Rear Seal - Remove
C2.2 Engine Cylinder Head - Inspect
3406C Generator Sets Cold Weather Starting