Connecting Rod Bearing Journal
Show/hide table
Diameter of the Connecting Rod Bearing Journals | ||
---|---|---|
Journals | Diameter | Service limit |
Standard | |
|
Undersize |
|
|
Undersize |
|
|
Show/hide table
(1) | If the diameter of the connecting rod bearing journal is less than the maximum undersize service limit, the crankshaft must be replaced. |
Clearance between the connecting rod bearing and the connecting rod bearing journal
- Standard clearance ...
0.035 to 0.085 mm (0.00138 to 0.00335 inch)
- Service limit ...
0.20 mm (0.0079 inch)
Caterpillar Information System:
C2.2 Engine Crankshaft
C2.2 Engine Water Temperature Regulator
C2.2 Engine and C1.5 Generator Set Engine Valve Lash - Inspect/Adjust
C2.2 Engine Engine Oil Relief Valve
C2.2 Engine Exhaust Manifold
C2.2 Engine Cylinder Head
3500 Engines High Altitude Derate
C2.2 Engine Cylinder Head Valves
C2.2 Engine Rocker Shaft
C2.2 Engine Engine Design
C2.2 Engine and C1.5 Generator Set Fuel Injection Timing - Check
C2.2 Engine and C1.5 Generator Set Troubleshooting
C2.2 Engine Piston and Rings
C2.2 Engine Gear Group (Front)
C2.2 Engine and C1.5 Generator Set Piston Ring Groove - Inspect
C2.2 Engine Engine Oil Pressure Switch
C2.2 Engine Glow Plugs
C2.2 Engine and C1.5 Generator Set Cylinder Head - Inspect
2005/10/10 A New Fuel Level Switch Is Now Being Used {1435, 7481}
C2.2 Engine and C1.5 Generator Set Glow Plugs - Test
C2.2 Engine Fuel Injection Timing - Check
C2.2 Engine Engine Valve Lash - Inspect/Adjust
2006/10/30 Using Injector Trim Files {1290, 7620}
2006/10/30 Using Injector Trim Files {1251, 7620}