Water Temperature Regulator
Show/hide table
| |
| Illustration 1 | g00877006 |
Opening temperature of the water temperature regulator ...
Fully open temperature of the water temperature regulator ...
Water Temperature Regulator Housing
Show/hide table
| |
| Illustration 2 | g00820265 |
Show/hide table
| |
| Illustration 3 | g01114379 |
|
Water temperature regulator | |
Note: Ensure that the water temperature regulator is seated correctly in the housing.
Note: Ensure that the jiggle pin (1) on the water temperature regulator is correctly positioned. Refer to illustration 3.
(1) Tighten the two setscrews for the water temperature regulator housing to the following torque. ...
(2) Cover
(3) Water temperature regulator
(4) Gasket
Caterpillar Information System:
C2.2 Engine and C1.5 Generator Set Engine Valve Lash - Inspect/Adjust
C2.2 Engine Engine Oil Relief Valve
C2.2 Engine Exhaust Manifold
C2.2 Engine Cylinder Head
3500 Engines High Altitude Derate
C2.2 Engine Cylinder Head Valves
C2.2 Engine Rocker Shaft
C2.2 Engine Engine Design
C2.2 Engine and C1.5 Generator Set Fuel Injection Timing - Check
C2.2 Engine and C1.5 Generator Set Troubleshooting
C6.6 Industrial Engine Reference Material
C2.2 Engine and C1.5 Generator Set Basic Engine
C2.2 Engine Crankshaft
C2.2 Engine Connecting Rod Bearing Journal
C2.2 Engine Piston and Rings
C2.2 Engine Gear Group (Front)
C2.2 Engine and C1.5 Generator Set Piston Ring Groove - Inspect
C2.2 Engine Engine Oil Pressure Switch
C2.2 Engine Glow Plugs
C2.2 Engine and C1.5 Generator Set Cylinder Head - Inspect
2005/10/10 A New Fuel Level Switch Is Now Being Used {1435, 7481}
C2.2 Engine and C1.5 Generator Set Glow Plugs - Test
C2.2 Engine Fuel Injection Timing - Check
C2.2 Engine Engine Valve Lash - Inspect/Adjust