Engine Oil Relief Valve
Show/hide table
| |
| Illustration 1 | g00820218 |
Note: When the engine oil relief valve is installed, ensure that all components are clean. Lightly lubricate all components with clean engine oil.
(1) O-ring
A new O-ring should be used when the engine oil relief valve is installed.
(2) Tighten the engine oil relief valve to the following torque. ...
The engine oil pressure at the engine oil relief valve is the following value. ...
Note: Always remove the engine oil relief valve before removing or installing the crankshaft. Damage to the engine oil relief valve or damage to the crankshaft may occur.
Caterpillar Information System:
C2.2 Engine Exhaust Manifold
C2.2 Engine Cylinder Head
3500 Engines High Altitude Derate
C2.2 Engine Cylinder Head Valves
C2.2 Engine Rocker Shaft
C2.2 Engine Engine Design
C2.2 Engine and C1.5 Generator Set Fuel Injection Timing - Check
C2.2 Engine and C1.5 Generator Set Troubleshooting
C6.6 Industrial Engine Reference Material
C2.2 Engine and C1.5 Generator Set Basic Engine
C2.2 Engine and C1.5 Generator Set Cooling System
C2.2 Engine and C1.5 Generator Set Glow Plugs
C2.2 Engine and C1.5 Generator Set Engine Valve Lash - Inspect/Adjust
C2.2 Engine Water Temperature Regulator
C2.2 Engine Crankshaft
C2.2 Engine Connecting Rod Bearing Journal
C2.2 Engine Piston and Rings
C2.2 Engine Gear Group (Front)
C2.2 Engine and C1.5 Generator Set Piston Ring Groove - Inspect
C2.2 Engine Engine Oil Pressure Switch
C2.2 Engine Glow Plugs
C2.2 Engine and C1.5 Generator Set Cylinder Head - Inspect
2005/10/10 A New Fuel Level Switch Is Now Being Used {1435, 7481}
C2.2 Engine and C1.5 Generator Set Glow Plugs - Test