Engine Design
Show/hide table
| |
| Illustration 1 | g00296424 |
|
Cylinder and valve location (A) Exhaust valve (B) Inlet valve | |
Bore ...
Stroke ...
Displacement ...
Cylinder arrangement ... In-line
Type of combustion ... Indirect injection
Compression ratio ... 23.3:1
Number of cylinders ... 4
Valves per cylinder ... 2
Valve lash
- Inlet valve ...
0.2 mm (0.0078 inch) - Exhaust valve ...
0.2 mm (0.0078 inch) - Exhaust valve ...
Firing order ... 1, 3, 4, 2
When the crankshaft is viewed from the front of the engine, the crankshaft rotates in the following direction. ... Clockwise
When the camshaft is viewed from the front of the engine, the camshaft rotates in the following direction. ... Clockwise
The front of the engine is opposite the flywheel end of the engine. The left side and the right side of the engine are determined from the flywheel end. Number 1 cylinder is the front cylinder of the engine.
Caterpillar Information System:
C2.2 Engine and C1.5 Generator Set Fuel Injection Timing - Check
C2.2 Engine and C1.5 Generator Set Troubleshooting
C6.6 Industrial Engine Reference Material
C2.2 Engine and C1.5 Generator Set Basic Engine
C2.2 Engine and C1.5 Generator Set Cooling System
C2.2 Engine and C1.5 Generator Set Glow Plugs
C2.2 Engine and C1.5 Generator Set Lubrication System
C2.2 Engine and C1.5 Generator Set Engine Oil Pressure Switch
C2.2 Engine and C1.5 Generator Set Air Inlet and Exhaust System
C2.2 Engine and C1.5 Generator Set Electric Starting Motor
C2.2 Engine and C1.5 Generator Set Alternator and Regulator
C2.2 Engine and C1.5 Generator Set Crankshaft Pulley
C2.2 Engine Rocker Shaft
C2.2 Engine Cylinder Head Valves
3500 Engines High Altitude Derate
C2.2 Engine Cylinder Head
C2.2 Engine Exhaust Manifold
C2.2 Engine Engine Oil Relief Valve
C2.2 Engine and C1.5 Generator Set Engine Valve Lash - Inspect/Adjust
C2.2 Engine Water Temperature Regulator
C2.2 Engine Crankshaft
C2.2 Engine Connecting Rod Bearing Journal
C2.2 Engine Piston and Rings
C2.2 Engine Gear Group (Front)