Fuel Injection Nozzles
Show/hide table
Illustration 1 | g01111978 |
(1) Tighten the fuel injection nozzles to the following torque. ...
Note: Remove the original seat washer from the hole for the fuel injector. Do not reuse the original seat washer.
Note: Apply a
The fuel injection nozzle will open at the following pressure. ...
Leakage in 10 seconds ... 0 drops
Caterpillar Information System:
C2.2 Engine and C1.5 Generator Set Fuel Injection Pump
C6.6 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
C2.2 Engine and C1.5 Generator Set Fuel Injection Lines
C2.2 Engine and C1.5 Generator Set Engine Design
C7.1-XQ200 Rental Generator Set Engine Crankcase Breather Element - Replace
C7.1 (Mech) Industrial Engine Water Pump - Inspect
C4.4 (Mech) Marine Generator Set MCS-3 Water Connection Group
C15 and C18 Petroleum Generator Sets Fuel System Secondary Filter - Replace
C4.4 (Mech) Marine Generator Set MCS-3 Fuel Lines
C4.4 Marine Auxiliary Generator Set Engine Crankcase Breather
C4.4 (Mech) Marine Generator Set MCS-3 Exhaust Elbow
C4.4 (Mech) Marine Generator Set MCS-3 Water Lines - Engines with a Keel Cooler
C2.2 Engine and C1.5 Generator Set Lifter Group
C2.2 Engine and C1.5 Generator Set Rocker Shaft
C2.2 Engine and C1.5 Generator Set Valve Mechanism Cover
C2.2 Engine and C1.5 Generator Set Cylinder Head Valves
C2.2 Engine and C1.5 Generator Set Cylinder Head
C2.2 Engine and C1.5 Generator Set Exhaust Manifold
C2.2 Engine and C1.5 Generator Set Camshaft
C4.4 Marine Auxiliary Generator Set Engine Heater Mounting Group - If Equipped
C2.2 Engine and C1.5 Generator Set Engine Oil Relief Valve
C2.2 Engine and C1.5 Generator Set Water Temperature Regulator
C7 On-highway Engine Cylinder Head
C2.2 Engine and C1.5 Generator Set Cylinder Block