Tilt Link - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 6S-6224     | 电动液压泵     | 1     |
6V-3175 | 双作用油缸     | 1     | |
4C-9634 | 拔销器螺柱     | 1     | |
4K-0684 | 硬垫圈     | 1     | |
9U-6832 | 高速螺母组件     | 1     | |
6V-4035 | 套筒     | 1     | |
B     | 6S-6224     | 电动液压泵     | 1     |
6V-3175 | 双作用油缸     | 1     | |
5P-4184 | 工具双头螺栓     | 1     | |
4K-0684 | 硬垫圈     | 1     | |
9U-6832 | 螺母     | 1     | |
6V-4035 | 套筒     | 1     | |
C     | 6S-6224     | 电动液压泵     | 1     |
6V-3175 | 双作用油缸     | 1     | |
4C-9634 | 拉拔器螺柱     | 1     | |
4K-0684 | 硬垫圈     | 1     | |
1P-0543 | 螺母     | 1     | |
1P-1839 | 轴承拆卸工具适配器     | 1     | |
6V-4035 | 套筒     | 1     |
开始:
- 连接转向机架锁。 请参阅拆解和组装, "转向机架锁 - 分离和连接"。
- 将铲斗水平放安置到地面上。
- 将适当的起吊设备连接到铲斗倾斜连杆 (1) 上。 铲斗倾斜连杆 (1) 的重量约为 64 kg (140 lb) 。
Show/hide table
图 1 | g00391837 |
- 将螺栓 (2) 、垫圈和垫片从销组件 (3) 上拆下。
- 使用工具 (A) 以拆下销组件 (3) 。
Show/hide table
图 2 | g00391840 |
- 将螺栓 (4) 、垫圈和垫片从销组件 (5) 上拆下。
Show/hide table
图 3 | g00391841 |
- 使用工具 (B) 以便拆下把铲斗倾斜连杆 (1) 连接到倾斜连杆上的销组件 (5) 。
Show/hide table
图 4 | g00391877 |
- 将适当的起吊设备连接到铲斗倾斜油缸 (1) 上。 铲斗倾斜连杆 (1) 的重量约为 64 kg (140 lb)。
Show/hide table
图 5 | g00348516 |
- 从铲斗倾斜连杆 (1) 的两端拆下唇密封 (6) 。 在铲斗倾斜连杆 (1) 的另一端重复此步骤。
- 使用工具 (C) 以便从铲斗倾斜连杆 (1) 上拆下轴承。 在铲斗倾斜连杆 (1) 的另一端重复此步骤。
Show/hide table
图 6 | g00348652 |
Caterpillar Information System:
966H and 972H Wheel Loaders Machine Systems Tilt Cylinder - Remove and Install
966H and 972H Wheel Loaders Machine Systems Bucket - Install
966H and 972H Wheel Loaders Machine Systems Bucket - Remove
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Braking System Hydraulic Tank
621G, 623G and 627G Wheel Tractor-Scrapers Engine Supplement Radiator Module - Install
525C, 535C and 545C Wheel Skidders Grapple Grapple Frame
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Install
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Remove
3516B Off-Highway Trucks Factory Passwords Worksheet
2005/03/21 Correction to Testing and Adjusting , "Torque Converter Stall and Implement Pump Double Stall - Test" {3101, 5055, 5084}
994F Wheel Loader Machine Systems Diverter Valve (Secondary Steering) - Assemble
3500B Series II Marine Engines MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
966H and 972H Wheel Loaders Machine Systems Tilt Link - Install
2005/04/18 Replacement of the Transmission Control Group for Earlier Models Is Updated {3065}
657G Wheel Tractor-Scraper Circuit Breakers - Reset
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Piston Pump (Implement, Steering, Brake)
621G, 623G and 627G Wheel Tractor-Scrapers Engine Supplement Water Pump - Remove and Install
G3304B and G3306B Engines Electric Starting System - Test
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
3176C and 3196 Engines for Caterpillar Built Machines Belt Tensioner
C7 Engines for Caterpillar Built Machines Electric Starting Motor
657G Wheel Tractor-Scraper Cooling System Coolant (ELC) - Change
904B Wheel Loader Power Train Governor Control Linkage - Adjust
325C LCR Excavator Machine Systems Duo-Cone Conventional Seals - Install