C27 and C32 Engines for Caterpillar Built Machines Caterpillar


Turbocharger Outlet Pressure Sensor - Remove and Install

Usage:

854K 221

Prosedur Pelepasan


PERHATIAN

Pastikan semua suku cadang bersih dari kontaminan.

Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen.




    Ilustrasi 1g01151057

  1. Putuskan susunan rangkaian kabel (2).

  2. Lepaskan sensor tekanan keluar turbocharger (1) dari manifold masuk.

  3. Lepaskan seal O-ring dari sensor tekanan keluar turbocharger (1).

Prosedur Pemasangan


PERHATIAN

Pastikan semua suku cadang bersih dari kontaminan.

Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen.




    Ilustrasi 2g01151057

  1. Pasang seal O-ring baru pada sensor tekanan keluar turbocharger (1).

  2. Pasang sensor tekanan keluar turbocharger (1) di manifold masuk dan kencangkan dengan torsi 10 ± 2 N·m (89 ± 18 lb in).

  3. Sambungkan susunan rangkaian kabel (2).

Caterpillar Information System:

C9 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C9 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
C9 Generator Set Engines Flywheel Housing
2005/05/02 Improved Turbochargers are Available {1052}
C9 Engines for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Install
C3.3 and C4.4 Generator Sets Additional Messages
C27 and C32 Generator Set Engines Engine Oil Pressure Sensor - Remove and Install
2005/03/21 The MIDS Display is Replaced by the Advisor Monitor Display {7490}
C7 and C9 Marine Engines CID 1249 FMI 08 Secondary Throttle Position signal abnormal
C7 and C9 Marine Engines CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Industrial Engines CID 0164 FMI 04 Injector Actuation Pressure voltage low
C9 Engines for Caterpillar Built Machines Water Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Water Pump - Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Alternator - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Electric Starting Motor - Remove and Install
C9 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C9 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
C9 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C9 Engines for Caterpillar Built Machines Front Cover - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.