C27 and C32 Generator Set Engines Caterpillar


Cylinder Liner - Install

Usage:

C32 132

Prosedur Pemasangan

Tabel 1
Alat yang Diperlukan 
Alat  Nomor Suku Cadang  Keterangan Suku Cadang  Jml 
2P-8260  Pemasang Liner Silinder 
  Pelumas Karet Bonderite S-OT 40 


PERHATIAN

Pastikan semua suku cadang bersih dari kontaminan.

Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen.


  1. Periksa proyeksi liner silinder. Rujuk ke Pengujian dan Penyetelan, "Proyeksi Liner Silinder - Inspeksi".


    Ilustrasi 1g01149469

  2. Pasang seal liner (3) pada liner silinder (1).

  3. Oleskan Alat (C) pada permukaan lubang liner blok silinder dan seal liner (3).

  4. Celupkan sebentar pita pengisi (2) ke oli engine yang bersih. Pasang pita pengisi pada liner silinder secepatnya.

  5. Gunakan Alat (B) untuk memasang liner silinder (1) ke blok silinder. Pastikan setiap tanda yang berhubungan dengan proyeksi liner silinder sudah sejajar.

Diakhiri dengan:

  1. Pasang piston dan connecting rod. Rujuk ke Pembongkaran dan Perakitan, "Piston dan Connecting Rod - Pemasangan".

Caterpillar Information System:

C27 and C32 Generator Set Engines Cylinder Liner - Remove
C7 and C9 Marine Engines Injection Actuation Pressure Sensor - Test
2005/03/07 Factory Password System for Caterpillar ECM Engines {1000, 1900, 7620}
3406E, C12, C15 and C18 Marine Engines Diagnostic Code Cross Reference
C11 and C13 Petroleum Engines Cylinder Head - Install
C11 and C13 Petroleum Engines Cylinder Head - Remove
C7 and C9 Marine Engines Transmission Oil Temperature Sensor Open or Short Circuit - Test
C7 and C9 Marine Engines Switch Circuits - Test
C7 and C9 Marine Engines Injector Solenoid Circuit - Test
C7 and C9 Marine Engines Indicator Lamp Circuit - Test
C7 and C9 Marine Engines Engine Temperature Sensor Open or Short Circuit - Test
C7 and C9 Marine Engines Engine Speed/Timing Sensor Circuit - Test
C7 and C9 Marine Engines Event Codes
C27 and C32 Generator Set Engines Piston Cooling Jets - Remove and Install
C27 and C32 Generator Set Engines Pistons and Connecting Rods - Remove
C27 and C32 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C27 and C32 Generator Set Engines Pistons and Connecting Rods - Install
2005/03/14 The Cylinder Liners Have a New Appearance {1216}
2005/03/14 The Cylinder Liners Have a New Appearance {1216}
C27 and C32 Generator Set Engines Connecting Rod Bearings - Remove
3406E, C12, C15 and C18 Marine Engines Event Codes
3054E Industrial Engine Crankshaft Wear Sleeve (Front) - Remove
3054E Industrial Engine Crankshaft Wear Sleeve (Front) - Install
3054E Industrial Engine Idler Gear (Front) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.