Improved Alternator Adjusting Rod {1405}
- Engine:
- 3500 and 3500B Family All
The 1S-4589 Rod has been replaced by the 252-6498 Rod. This change also requires either the 252-6464 Block or the 257-2077 Block. Use the 252-6464 Block in applications that require a 12.7 mm (0.5 inch) mounting bolt. Use the 257-2077 Block in applications that require a 15.875 mm (0.625 inch) mounting bolt.
Show/hide table
 | |
| Illustration 1 | g01150014 |
(1) Block (2) Mounting bolt (3) Rod | |
Show/hide table
 | |
| Illustration 2 | g01150018 |
(1) Block (2) Mounting bolt (3) Rod | |
Caterpillar Information System:
C7 and C9 Marine Engines Analog Sensor Supply Circuit - Test
UPS View User Guide Remote Notification
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C9 Engines for Caterpillar Built Machines Unit Injector - Install
C9 Engines for Caterpillar Built Machines Unit Injector - Remove
UPS View User Guide Log Files
3176C and 3196 Industrial Engines Air Compressor Drive Gear - Install - Two Cylinder
C3.3 and C4.4 Generator Sets Fuel Injection Nozzles - Test/Exchange
D Series Excavator Monitoring System Password Change Mode
3406E, C12, C15 and C18 Marine Engines Can Not Reach Top Engine RPM
D Series Excavator Monitoring System Service Mode
C7 and C9 Marine Engines Sensors and Electrical Connectors
UPS View User Guide User Operations
UPS View User Guide Hotkeys
2005/05/23 New Hoses for the Jacket Water Heater {1383}
C7 and C9 Marine Engines CAN Data Link Circuit - Test
C7 and C9 Marine Engines Digital Sensor Supply Circuit - Test
C7 and C9 Marine Engines Electrical Power Supply Circuit - Test
C7 and C9 Marine Engines Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Marine Engines Engine Speed/Timing Sensor Circuit - Test
C7 and C9 Marine Engines Engine Temperature Sensor Open or Short Circuit - Test
C7 and C9 Marine Engines Indicator Lamp Circuit - Test
C7 and C9 Marine Engines Injector Solenoid Circuit - Test
C7 and C9 Marine Engines Switch Circuits - Test