Improved Alternator Adjusting Rod {1405}
- Off-Highway Truck/Tractor:
- 777D (S/N: AGC1-UP; 3PR1-UP; 2YW1-UP)
- Wheel Loader:
- 992G (S/N: 7HR1-UP; AZX1-UP; ADZ1-UP)
- Wheel Dozer:
- 854G (S/N: AMP1-UP; A4W1-UP)
- 793C (S/N: ATY1-UP; CBR1-UP; 4AR1-UP; 4GZ1-UP)
- 785 (S/N: 8GB1-UP)
- 785B (S/N: 6HK1-UP)
- 789B (S/N: 7EK1-UP)
- 793 (S/N: 3SJ1-UP)
- 797B (S/N: JSM1-UP)
- 776B (S/N: 6JC1-UP)
- 776C (S/N: 2TK1-UP)
- 776D (S/N: 5ER1-UP; AFS1-UP)
- 777B (S/N: 4YC1-UP)
- 777C (S/N: 4XJ1-UP)
- 777D HAA (S/N: AGY1-UP)
- 784B (S/N: 5RK1-UP)
- 784C (S/N: 2PZ1-UP)
- 785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
- 789 (S/N: 9ZC1-UP)
- 789C (S/N: 2BW1-UP)
- 793B (S/N: 1HL1-UP)
- 793D (S/N: FDB1-UP)
- 797 (S/N: 5YW1-UP)
- 994 (S/N: 9YF1-UP)
- 994D (S/N: 3TZ1-UP)
The 1S-4589 Rod has been replaced by the 252-6498 Rod. This change also requires either the 252-6464 Block or the 257-2077 Block. Use the 252-6464 Block in applications that require a 12.7 mm (0.5 inch) mounting bolt. Use the 257-2077 Block in applications that require a 15.875 mm (0.625 inch) mounting bolt.
Show/hide table
Illustration 1 | g01150014 |
(1) Rod (2) Mounting bolt (3) Block |
Show/hide table
Illustration 2 | g01150018 |
(1) Rod (2) Mounting bolt (3) Block |
Caterpillar Information System:
834H Wheel Dozer and 836H Landfill Compactor Power Train Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
2005/03/07 New Clamp for the Water Lines {1380}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
793D Off-Highway Truck/Tractor Solenoid Valve (Air Start) - Remove and Install
C9 Engines for Caterpillar Built Machines Unit Injector - Install
793D Off-Highway Truck/Tractor Slack Adjuster (Rear) - Install
C9 Engines for Caterpillar Built Machines Unit Injector - Remove
793D Off-Highway Truck/Tractor Slack Adjuster (Rear) - Remove
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Stick - Install
769D Off-Highway Truck/Tractor and 771D Quarry Truck Circuit Breakers - Reset
3176C and 3196 Industrial Engines Air Compressor Drive Gear - Install - Two Cylinder
793D Off-Highway Truck/Tractor Slack Adjuster (Front) - Install
2005/03/07 Improved Alternator Adjusting Rod {1405}
834H Wheel Dozer and 836H Landfill Compactor Power Train Modulating Valve (Torque Converter Impeller Clutch) - Remove and Install
2006/09/11 A New Exhaust Bypass Valve (Wastegate) is Used {1057}
RM-300 Soil Stabilizer Sound Information and Vibration Information
Load Haul Dumps Machines , and Underground Articulated TrucksAutomatic Lubrication System Automatic Lubrication System Air - Purge
Load Haul Dumps Machines , and Underground Articulated TrucksAutomatic Lubrication System General Information
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System General Information
773E Off-Highway Truck/Tractor and 775E Quarry Truck Additional Messages
834H Wheel Dozer and 836H Landfill Compactor Power Train Relief Valve (Torque Converter Outlet) - Remove
PM-200 Cold Planer Before Starting Engine
834H Wheel Dozer and 836H Landfill Compactor Power Train Relief Valve (Torque Converter Outlet) - Install
793D Off-Highway Truck/Tractor Relay Valve (Air Start) - Remove