General Information (Getting Started)
This section explains the installation procedure for the UPS View software.
UPS View requires a PC running under one of the following operating systems:
- Microsoft Windows 98
- Microsoft Windows 2000
- Microsoft Windows ME
- Microsoft Windows NT 4.0
- Microsoft Windows XP
- Microsoft Windows 7
UPS View also requires the following:
- PC with no less than a 200 MHz CPU
- 32 megabyte of RAM
- 5 MB free hard drive space
The following items are optional:
- A modem
- An ethernet card
- RS-232 or RS-485 cable
Note: The RS-232 cable and the RS-485 cable are needed when the network connection and/or the modem connection is not available.
The following instructions explain the installation and the setup that is required for monitoring and/or controlling your UPS with UPS View.
Note: To set up UPS View correctly in the Windows XP® environment, an appropriate firewall must be set up. This environment must assure that the User Datagram Protocol (UDP) packets are enabled.
- Insert the disk for the installation of the software into the PC.
- Run "UPS View.exe".
- Click on the "NEXT" button.
- Read the license agreement.
- Click on the "YES" button.
- Identify the desired location for the files.
- Click on the "FINISH" button.
Caterpillar Information System:
UPS View User Guide Log On
UPS View User Guide Font Setting
UPS View User Guide Display Configuration
C3.3 and C4.4 Generator Sets Engine Oil and Filter - Change
UPS View User Guide Tile Arrangement
2005/02/28 Improved Mounting for the Radiator Is Now Used {1353}
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Remove - C32
C27 and C32 Industrial and Petroleum Engines Fuel Filter and Water Separator
C27 and C32 Engines for Caterpillar Built Machines Engine Trunnion - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Relief Valve (Swing Pressure)
2005/03/07 260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
C27 and C32 Generator Set Engines Rocker Arm and Shaft - Install
UPS View User Guide Communication Connections
C9 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
2005/03/07 New Factory Password System for Caterpillar Engines {1000, 1900}
C9 Generator Set Engines Fuel Filter Base
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Install - C32
C7 and C9 Marine Engines Sensors and Electrical Connectors
D Series Excavator Monitoring System Service Mode
3406E, C12, C15 and C18 Marine Engines Can Not Reach Top Engine RPM
D Series Excavator Monitoring System Password Change Mode
C3.3 and C4.4 Generator Sets Fuel Injection Nozzles - Test/Exchange
3176C and 3196 Industrial Engines Air Compressor Drive Gear - Install - Two Cylinder
UPS View User Guide Log Files