C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Caterpillar


CID 0172 FMI 04 Intake Manifold Air Temp short to ground

Usage:

525C 525
产生此代码的情况:

进气歧管温度传感器送来的信号电压低于正常值或进气歧管空气温度高于 140 °C (284 °F)。

系统响应:

电子控制模块 (ECM) 将会记录该诊断代码。 ECM 视进气歧管空气温度为无效数据并采用缺省值。

  • 不会影响性能。

测试步骤 1. 进行以下的诊断步骤: 发动机温度传感器开路或短路 - 测试

结果:

  • 正常 - 停止

Caterpillar Information System:

C27 and C32 Generator Set Engines CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C27 and C32 Engines for Caterpillar Built Machines CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C27 and C32 Generator Set Engines Turbocharger - Disassemble
C27 and C32 Generator Set Engines Turbocharger - Remove
2005/02/21 A New Integral Seal Replaces the Fiber Gasket for the Raw Water Pump {7555}
C27 and C32 Generator Set Engines Electronic Unit Injector - Install
C27 and C32 Generator Set Engines Fuel Transfer Pump - Install
C1.5 GEN SET Electric Power Generation Safety Messages
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Electrical Connector - Inspect
C9 Engines for Caterpillar Built Machines General Information
C11 and C13 Engines Engine Mounting
C7 On-highway Engine Engine Operation
2007/04/16 New Guidelines: When to Consult the Application Support Center (ASC) or the Dealer Solution Network (DSN) {1000}
C7 and C9 Engines for Caterpillar Built Machines CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C27 and C32 Generator Set Engines Turbocharger - Assemble
C27 and C32 Generator Set Engines Turbocharger - Install
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C27 and C32 Tier 4 Engines Flywheel Housing
C27 and C32 Generator Set Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Air Inlet Heater Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.