Bucket Cylinder
Show/hide table
Illustration 1 | g01146059 |
(1) Lubricate the threads with clean grease. Tighten the 6V-7676 Nut to the following torque. ... 500 ± 50 N·m (370 ± 37 lb ft)
(2) Lubricate the threads with clean grease. Tighten the 151-3190 Head to the following torque. ... 450 ± 50 N·m (332 ± 37 lb ft)
(3) Lubricate the sealing lip slightly with the lubricant that is being sealed.
(4) Apply sealant 7M-7456 Retaining Compound to the groove prior to assembly.
Caterpillar Information System:
330C Excavator Hydraulic System Relief Valve (Crossover) - Test and Adjust
330C Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
330C Excavator Hydraulic System Swing Bearing Movement - Measure
325D and 329D Excavators Fuses - Replace
365C Front Shovel Hydraulic System Specifications
365C Front Shovel Hydraulic System Relief Valve (Line) - Test and Adjust
330C With Drilling Front Machine System Specifications Cooling Lines
345C Excavator Tool Control System System 14: Relief Valve (Main) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
345C Excavator Tool Control System System 14: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
345C Excavator Tool Control System System 14: Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Control Valve
302.5C Mini Hydraulic Excavator Machine System Specifications Stick Cylinder
330C Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
330C Excavator Hydraulic System Fan Motor (Hydraulic Oil Cooler) - Test - Measurement of Case Drain Oil
330C Excavator Hydraulic System Fan Motor (Hydraulic Oil Cooler) - Test - Measurement of Case Drain Oil
330C Excavator Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
C11 and C15 Engines for Caterpillar Built Machines CID 0269 FMI 04 Sensor Supply too low
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers CID 0269 FMI 03 Sensor Supply too high
330C Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
330C Excavator Hydraulic System Pump Control (Output Flow) - Adjust
330C Excavator Hydraulic System Pump Control (Negative Flow) - Test
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers CID 1603 FMI 12 Machine Control Module malfunction
330C Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
330C Excavator Hydraulic System Gear Pump (Pilot) - Test
330C Excavator Hydraulic System Gear Pump (Fan Motor) - Test