Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
- Caterpillar Products:
- All
Show/hide table
 | |
| Illustration 1 | g01157067 |
7I-7133 Cover Plate | |
Show/hide table
 | |
| Illustration 2 | g01157068 |
7I-7151 Flange | |
Dealer Service Tools offers the 7I-7133 Cover Plate and the 7I-7151 Flange for use during flow tests on the main hydraulic pumps for most Caterpillar machines.
The 7I-7133 Cover Plate blocks a port for the test. The 7I-7151 Flange has a No. 16 port for plumbing in a flow meter.
Show/hide table
| Specifications for Cover Plate and Flange | ||
| Plate Dimensions | Bolt Hole Dimensions | Thread Specifications |
| 7I-7133 Cover Plate | ||
96.7 X 61.8 X 18 mm (3.81 X 2.43 X 0.71 inch) |
4 holes with centers located on corners of 66.7 X 31.8 mm (2.63 X 1.25 inch) rectangle |
Bolt holes M12 X 1.75 X 6H THD |
| 7I-7151 Flange | ||
98 X 70 X 22 mm (3.9 X 2.8 X 0.9 inch) |
4 holes with enters located on corners of 77.8 X 42.9 mm (3.06 X 1.69 inch) rectangle |
No thread on bolt holesNo.16 port with 1-5/16-12-2B THD |
Caterpillar Information System:
C1.5 GEN SET Electric Power Generation Refill Capacities and Recommendations
2013/09/27 Test Kit Allows Technician to Check Air Systems with Bendix Air Compressors {0701, 1803}
Electronic Installation Guide{1000} Electronic Installation Guide{1000}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201} Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
2005/02/21 Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
C9 Urban Transit Bus Engine Air Compressor - Remove and Install
PM820, PM822, and PM825 Cold Planer Roading the Machine
2005/01/31 The Connections for Engine Lockout Must be Wired in order to Start the Engine {1450}
C7 and C9 Engines for Caterpillar Built Machines E096 High Fuel Pressure
3500 Petroleum Engines and Petroleum Generator Sets Control Panel
2005/01/31 Improved Lifters are Now Used {1102, 1121, 1123}
2005/01/31 New Injector Seals are Now Used {1290}
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Generator Lead Connections
3508C, 3512C and 3516C Marine Engines Auxiliary Water Pump - Remove
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736} Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
3500 Engines Auxiliary Water Pump - Disassemble
3500 Engines Auxiliary Water Pump - Assemble
3508B, 3512B and 3516B Generator Set Engines Exhaust Elbow - Remove and Install
374F Excavator Bucket Linkage - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines Diagnostic Codes
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C27 and C32 Engines for Caterpillar Built Machines E194 High Exhaust Temperature
C27 and C32 Generator Set Engines E361 High Engine Coolant Temperature
C27 and C32 Engines for Caterpillar Built Machines E362 Engine Overspeed