Piston Pump (Right Drag Conveyor and Left Auger Conveyor) - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 6V-4876     | Lubricant     | 1     |
- Apply Tooling (A) to the splines of piston pump (1) .
Show/hide table
Illustration 1 | g01140340 |
- Install the O-ring seal on piston pump (1) .
- Attach a suitable lifting device to piston pump (1) and install piston pump (1) and bolts (7). The weight of piston pump (1) is approximately 77 kg (170 lb).
- Connect harness assemblies (6) and harness assembly (5) on piston pump (1) .
Show/hide table
Illustration 2 | g01140339 |
- Connect hose assemblies (4) on piston pump (1) .
Show/hide table
Illustration 3 | g01140338 |
- Connect hose assemblies (3) on piston pump (1) .
Show/hide table
Illustration 4 | g01140335 |
- Connect hose assemblies (2) on piston pump (1) .
Show/hide table
Illustration 5 | g01140334 |
- Fill the hydraulic oil tank with hydraulic oil. Refer to Operation and Maintenance Manual for the correct procedure.
Caterpillar Information System:
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Hydraulic Tank
C15 and C18 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 1964 - FMI 03
C11 and C15 Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
267B, 277B and 287B Multi Terrain Loaders Power Train Piston Pump (Hydrostatic) - Install
267B, 277B and 287B Multi Terrain Loaders Power Train Piston Pump (Hydrostatic) - Remove
793D Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet) - Remove and Install
793D Off-Highway Truck Power Train Drive Shaft Guard (Rear) - Remove and Install
C11 and C15 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
834H Wheel Dozer and 836H Landfill Compactor Power Train Transmission, Input Transfer Gears and Output Transfer Gears - Remove
793D Off-Highway Truck Power Train Drive Shaft Guard (Front) - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 1964 - FMI 01
PM-201 Cold Planer Daily Inspection
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Disassemble
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Assemble
PM-201 Cold Planer Moldboard Down Pressure Adjustment
AP500F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Disassemble
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 1964 - FMI 04
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Left Drag Conveyor and Right Auger Conveyor) - Remove
C11 and C15 Engines for Caterpillar Built Machines Ether Injection System - Test
R2900G Load Haul Dump Ride Control Accumulator - Check - If Equipped
PM-201 Cold Planer Air Compressor - Inspect
PM-201 Cold Planer Air Tank - Drain
PM-201 Cold Planer Backup Alarm - Test