C9 Urban Transit Bus Engine Caterpillar


Coolant Temperature Sensor - Remove and Install

Usage:

C-9 MTB


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.



NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.


Note: Drain the coolant level until the coolant is below the sensor.




Illustration 1g01139649

(1) Coolant temperature sensor ... 20 ± 5 N·m (15 ± 4 lb ft)

Caterpillar Information System:

2005/01/31 Improved Exhaust Bellows {1061}
3516C HD Petroleum Well Service Engine Reference Material
C11 and C13 Engines Engine Oil Level Switch - If Equipped
3500 Petroleum Engines and Petroleum Generator Sets Refill Capacities and Recommendations
3500 Petroleum Engines and Petroleum Generator Sets Specifications
12M Motor Grader Shipping the Machine
3412E Petroleum Engine ECM/Personality Module - Test
3500B High Displacement Generator Set Engines Programmable System Parameters
3500 Petroleum Engines and Petroleum Generator Sets Model View Illustrations
C27 and C32 Industrial and Petroleum Engines E539 High Intake Manifold Air Temperature
Oil Volumes for Track Link Assemblies {4169} Oil Volumes for Track Link Assemblies {4169}
2005/04/18 An Improved Rear Gear Group is Available for Reverse Engine Rotation {1204, 1206}
C9 Urban Transit Bus Engine Idler Pulley - Remove and Install
2005/01/31 New Injector Seals are Now Used {1290}
2005/01/31 Improved Lifters are Now Used {1102, 1121, 1123}
3500 Petroleum Engines and Petroleum Generator Sets Control Panel
C7 and C9 Engines for Caterpillar Built Machines E096 High Fuel Pressure
2005/01/31 The Connections for Engine Lockout Must be Wired in order to Start the Engine {1450}
PM820, PM822, and PM825 Cold Planer Roading the Machine
C9 Urban Transit Bus Engine Air Compressor - Remove and Install
2005/02/21 Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201} Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Electronic Installation Guide{1000} Electronic Installation Guide{1000}
2013/09/27 Test Kit Allows Technician to Check Air Systems with Bendix Air Compressors {0701, 1803}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.