1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i02254945

525C, 535C and 545C Wheel Skidders Caterpillar


Transmission Oil Level - Check

Usage:

525C 525
Show/hide table
Illustration 1g01135465
Show/hide table
Illustration 2g01135568

  • Open the access door on the right side of the machine.

  • Remove the dipstick and wipe off the dipstick with a clean cloth. This will ensure a more accurate measurement of the oil level.

  • Reinsert the dipstick and remove the dipstick again. Check the oil level. The oil level should be between the marks on the dipstick while the engine is running at low idle and the transmission is in neutral.

  • If the oil level is low, remove the oil filler cap and add transmission oil through the oil filler tube, as needed. Reinstall the oil filler cap.

  • Install the dipstick and close the access door.

    • Caterpillar Information System:

    994F Wheel Loader Steering System Oil Filter (Steering Cooler Screen) (Brake Cooler Screen)
    994F Wheel Loader Hydraulic System Oil Level (Brake Cooling) - Check
    3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Fuel System Operation
    994F Wheel Loader Hydraulic System Oil Level (Implement) - Check
    C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Factory Passwords
    C11 and C13 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
    994F Wheel Loader Hydraulic System Oil Filter (Steering Pump Case Drain) - Replace
    973D Track-Type Loader Cooling System Water Temperature Regulator - Clean/Replace
    C11 and C13 Engines for Caterpillar Built Machines Alternator - Remove and Install
    C4.4 Industrial Engine Overspeed
    AD30 Underground Articulated Truck Hydraulic System Pilot Control Actuator (Hoist Raise)
    AD30 Underground Articulated Truck Hydraulic System Pilot Control Actuator (Hoist Lower)
    3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Remove
    3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Install
    3306B Industrial Engine Emergency Stopping
    988H Wheel Loader C18 Engine Supplement Hood and Engine Enclosure - Install
    3500B Marine Propulsion Engines Auxiliary Water Pump - Inspect
    994F Wheel Loader Steering System Monitoring System (Steering Functions)
    988H and 988K Wheel Loaders Power Train Drive Shaft (Front) and Drive Shaft Support Bearing - Remove
    3406E, C12, C15 and C18 Marine Engines CID 0096 FMI 03 Fuel Level Sensor open/short to +batt
    3406E, C12, C15 and C18 Marine Engines CID 0096 FMI 04 Fuel Level Sensor short to ground
    C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove
    3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Fuel Filter Base - Electric Fuel Priming Pump
    3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Disassemble
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.