2013/09/02 Caterpillar


A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}

Usage:

769C 01X
Caterpillar Products:
  • All Machines
  • Service Magazine SEPD0766, 10 January 2005, "A New Strainer Assembly For the Hydraulic Tank Is Now Available". The machine effectivity in this article has been updated. Refer to the following information.

    Corrosion has been reported on some machines that use the 3D-6678 Strainer. A new 248-0363 Strainer that is nonmetallic is available for use in place of the 3D-6678 Strainer .

    Replace the 3D-6678 Strainer in applications that have had corrosion on the strainer in the hydraulic oil tank.

    Caterpillar Information System:

    C11 and C13 Engines for Caterpillar Built Machines Fan Drive Mounting Group - Remove and Install
    C32 Marine Engines Event Codes
    C11 and C13 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
    311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Remove
    3508B, 3512B and 3516B Generator Set Engines Engine Oil Sequence Valves - Remove and Install
    3412E Petroleum Engine Diagnostic Code Cross Reference
    3412E Petroleum Engine Intermittent Engine Shutdown
    C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
    C11 and C13 Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
    C11 and C13 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
    C11 and C13 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
    C9.3 Tier 4 Final Engines Fuel Filter Base
    C11 and C15 Engines for Caterpillar Built Machines E096 High Fuel Pressure
    3508B, 3512B and 3516B Generator Set Engines Balancer Group (Front) - Remove and Install - 3508B Engine
    3412E Petroleum Engine CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
    3412E Petroleum Engine CID 0110 FMI 04 Engine Coolant Temperature short to ground
    311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Flush
    311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Recovery
    311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Required Tools
    311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Install
    311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Compressor Oil - Check
    C4.4 Industrial Engine Overspeed
    C11 and C13 Engines for Caterpillar Built Machines Alternator - Remove and Install
    C11 and C13 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.