Fuel Filter Base
Show/hide table
| |
| 图 1 | g03834268 |
|
典型示例 | |
Show/hide table
| 190-8970 燃油注油泵总成、 217-8339 燃油注油泵组件和 235-8724 输油泵总成的技术规格 | |||
|---|---|---|---|
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 6D-5801 锁紧螺母 | 拧紧至扭矩为 |
| 2 | 2 | 179-7267 塞 | 拧紧至扭矩为 |
| 3 | 1 | 9S-8002 O 形密封圈塞 | 拧紧至扭矩为 |
| 4 | 1 | 162-2222 弹簧 | 在测试力下的长度为 测试力为 测试后的自由长度为 |
| 5 | 1 | 9S-4167 空心螺柱 | 将红色 Loctite 263 涂覆到螺纹的 拧紧至扭矩为 |
Caterpillar Information System:
2005/01/17 New Bearings for the Engine Oil Pump are Available {1304}
C7 Engines for Caterpillar Built Machines Cooling System - Test
C11 and C13 Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
3126B Petroleum Engine CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Petroleum Engine CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3500 and 3500B Engines Aftercooler Core - Inspect/Clean
3176C Engines for Caterpillar Built Machines CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Charge
3412E Petroleum Engine Auxiliary Temperature Sensor Circuit - Test
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Evacuate
C11 and C13 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
3412E Petroleum Engine Intermittent Engine Shutdown
3412E Petroleum Engine Diagnostic Code Cross Reference
3508B, 3512B and 3516B Generator Set Engines Engine Oil Sequence Valves - Remove and Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Remove
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C32 Marine Engines Event Codes
C11 and C13 Engines for Caterpillar Built Machines Fan Drive Mounting Group - Remove and Install
2013/09/02 A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}