Gear Pump (Fan Drive) - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
B     | 1P-0510     | Driver Gp     | 1     |
C     | 141-5831     | Silicone Sealant     | 1     |
- Install O-ring seal (12) on gear pump (1) .
Show/hide table
Illustration 1 | g02093963 |
- Use Tooling (B) and install lip seal (9) into adapter (11) .
Show/hide table
Illustration 2 | g02093962 |
- Install adapter (11) on gear pump (1) and install bolts (10) .
- Install O-ring seal (8) .
- Install gear (7) .
Show/hide table
Illustration 3 | g02094133 |
- Fill the cavity between the pump shaft and gear (7) with Tooling (C) .
- Install the washer and nut (6) . Tighten nut (6) to a torque of 110 ± 10 N·m (81 ± 7 lb ft).
Show/hide table
Illustration 4 | g02094156 |
- Install integral seal (5) .
Show/hide table
Illustration 5 | g02093958 |
- Install shim (4) .
Show/hide table
Illustration 6 | g02093955 |
- Install gear pump (1) and bolts (3) .
Show/hide table
Illustration 7 | g01133283 |
- Connect hose assemblies (2) to gear pump (1) .
Show/hide table
Illustration 8 | g01133274 |
- Fill the hydraulic oil tank with hydraulic oil. Refer to Operation and Maintenance Manual for the correct procedure.
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines E172 High Air Filter Restriction
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Global Positioning System Interface Module
C11 and C15 Engines for Caterpillar Built Machines CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines Camshaft - Install
988H and 988K Wheel Loaders Power Train Transmission from Input Transfer Gears and Output Transfer Gears - Separate
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348} Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
725 and 730 Articulated Trucks Brake Pads - Check
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning System Troubleshooting
C11 and C13 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Oil Renewal System
793C Off-Highway Truck Air/Hydraulic Cylinder Breather - Clean
C11 and C13 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Engine Vision Interface Module
793C and 793C XQ Off-Highway Truck Suspension Cylinder Valve (Suspension Cylinder Charging)
988H and 988K Wheel Loaders Power Train Transmission to Input Transfer Gears and Output Transfer Gears - Connect
2005/01/17 The Slack Adjusters Have a New Housing {4261}
TH220B, TH330B and TH340B Telehandlers Hydraulic System Manifold Valve (Inlet)
TH220B, TH330B and TH340B Telehandlers Hydraulic System Check and Relief Valves
TH220B, TH330B and TH340B Telehandlers Hydraulic System Manifold Valve (Outlet)
TH220B, TH330B and TH340B Telehandlers Hydraulic System Main Control Valve (Implement)
C7 and C9 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Hood Tilt Actuator - Remove and Install
797B Off-Highway Truck Fan Drive Hydraulic System Hydraulic Tank
789C Off-Highway Truck Seat