3508C, 3512C and 3516C Marine Engines Caterpillar


Turbocharger Inlet Pressure Sensor - Remove and Install

Usage:

3512C 2A2

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 1g01129348

  1. 断开线束组件并拆下涡轮增压器进口压力传感器 (1)。

  2. 将 O 形密封圈从涡轮增压器进口压力传感器上拆下。

安装步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
1U-6396  O 形圈组件固定胶 


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 2g01129348

  1. 为涡轮增压器进口压力传感器 (1) 安装一个新的 O 形密封圈。 将工具 (A) 涂抹在 O 形密封圈上。

  2. 安装涡轮增压器进口压力传感器 (1) 并拧紧至扭矩为 10 ± 2 N·m (89 ± 18 lb in)

  3. 连接线束组件。

Caterpillar Information System:

307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Expansion Valve
3508C, 3512C and 3516C Marine Engines Coolant Temperature Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Turbocharger Outlet Pressure Sensor - Remove and Install
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Evaporator Coil
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Receiver-Dryer
C32 Marine Engines Analog Sensor Supply Circuit - Test
2005/03/01 A New Sleeve Kit Is Now Available {1713}
C9 Industrial Engines Diagnostic Flash Code Retrieval
C7 Industrial Engine Engine Monitoring System (EMS)
3126B Petroleum Engine ECM/Personality Module - Test
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C4.4 Industrial Engine Customer Specified Parameters
C7 Petroleum Engine Engine Oil and Filter - Change
C9 Industrial Engines Plate Locations and Film Locations
3500B High Displacement Generator Set Engines Reference Material
345C Excavator Hydraulic System Pump Control (Output Flow) - Adjust
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Pressure Switch (Refrigerant Pressure Cutoff)
2004/12/01 Updated Information to Operation and Maintenance Manual, SEBU6251 , "Engine Oil (3116 and 3126 Marine Engines" {1348, 7581}
3508C, 3512C and 3516C Marine Engines Engine Oil Pressure Sensor - Remove and Install
2004/12/01 New Cooling Screens in TMI for Electric Power Packages {1353}
3406C Engines for Caterpillar Built Machines Alternator and Regulator
3508C, 3512C and 3516C Marine Engines Fuel Pressure Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Crankcase Pressure Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Aftercooler Coolant Temperature Sensor - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.