Reference Numbers
为获得零件和维修服务，可能需要识别表 1 中的各项。 有些信息显示在发动机序列号标牌和/或信息标牌上。 找出您的发动机信息。 在表 1中的适当位置记录这些信息。 复制一份记录表。 保存这些信息供将来参考。。
最高一层的零件号在发动机零件手册中与发动机配置总成号一同列出。 偶尔产品出厂前某一配置可能被稍微更改过。 在这些情况下，更改号说明配置已作过更改。
装箱配置也被叫做定价配置或用户配置。 这是一个总组件包，里面包括没有包括在发动机配置总成中的附件和选装件。
您的 Caterpillar 代理商可能在技术营销信息系统中用到这些性能技术规格。 在发动机出厂前，已测试发动机性能。 记录了详细的性能数据。 可以使用性能技术规格号获得这些数据。
Show/hide table
| 参考信息 | |
| 发动机型号 | |
| 序列号 | |
| 配置总成编号 | |
| 更改号 | |
| 装箱配置 | |
| 涡轮增压器 | |
| 燃油滤清器滤芯 | |
| 润滑油滤清器滤芯 | |
| 辅助机油滤清器滤芯 | |
| 空气滤清器滤芯 | |
| 风扇传动带 | |
| 交流发电机传动带 | |
| 润滑系统容量 | |
| 冷却系统容量 | |
| 性能技术规格号 | |
| 个性化模块 | |
| 低怠速转速 | |
| 高怠速转速 | |
| 满载转速 | |
| 额定功率 | |
Caterpillar Information System:
C6.6 Industrial Engine Model View Illustrations
3126B Petroleum Engine Injection Actuation Pressure - Test
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Lubrication System
C11 and C13 Engines for Caterpillar Built Machines General Information
C4.4 Industrial Engine Electrical System
C7.1 Industrial Engine Engine Stopping
2004/12/01 New Lockwasher Will Improve Varistor Reliability {4466}
2004/12/01 Correct Wiring Diagrams Have Been Identified for 480 Volt Sensing VR3 to VR6 Regulator Conversion {4467}
3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Install
3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Remove
3126B Petroleum Engine Diagnostic Code Cross Reference
345C Excavator Machine System Specifications Stick
345C Excavator Machine System Specifications Stick
345C Excavator Machine System Specifications Stick - 3.0 m (9.84 ft)
374F Excavator Belt - Inspect/Adjust/Replace
Installation of 262-6141 Alarm Gp {7406} Installation of 262-6141 Alarm Gp {7406}
2004/12/01 Lifting Brackets and Hardware are Available {1122}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3508C, 3512C and 3516C Marine Engines Piston Cooling Jets - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump - Install