Accessory Drive (Front) - Assemble
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-0520 | 起子总成 | 1 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 将套筒轴承 (14) 中的机油孔与接头组件 (12) 中的机油孔对齐。 使用工具 (A) 和合适的压具在接头组件 (12) 中安装套筒轴承 (14)。
- 将管塞 (11) 安装在接头组件 (12) 中。
- 将干净的发动机油涂抹在套筒轴承 (14)上，并将轴 (15)安装到接头组件 (12)中。
- 安装止推垫圈 (7) 和螺栓 (8)。
- 在轴 (15) 上安装齿轮 (9) 并安装螺栓 (10)。
- 将 O 形密封圈 (6) 和 O 形密封圈 (13) 安装在接头组件 (12) 上。 将清洁的发动机机油涂在 O 形密封圈上。
Show/hide table
图 2 g01126654 - 将套筒轴承 (3) 中的机油孔与接头组件 (1) 中的机油孔对齐。 使用工具 (A) 和合适的压具在接头组件 (1) 中安装套筒轴承 (3)。
- 将 O 形密封圈 (2) 和 O 形密封圈 (4) 安装在接头组件 (1) 上。 将清洁的发动机机油涂在 O 形密封圈上。
- 将管塞 (5) 安装在接头组件 (1) 中。
Show/hide table
| |
| 图 1 | g01126667 |
结束:
- 安装附件驱动器 (前)。 参考拆解和组装, "附件驱动器（前）- 安装"。
Caterpillar Information System:
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Disassemble
345C Excavator Machine System Specifications Boom
345C Excavator Machine System Specifications Final Drive
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
568 Forest Machine Machine System Specifications Recoil Spring
C9 Marine Generator Set Product Lifting
C32 Marine Engines System Configuration Parameters
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Flash Programming
C9 Engines for Caterpillar Built Machines Basic Engine
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Assemble
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Housing (Front) - Disassemble
3508C, 3512C and 3516C Marine Engines Flywheel - Remove and Install
3126B Petroleum Engine Diagnostic Code Cross Reference
3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Remove
3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Install
2004/12/01 Correct Wiring Diagrams Have Been Identified for 480 Volt Sensing VR3 to VR6 Regulator Conversion {4467}
2004/12/01 New Lockwasher Will Improve Varistor Reliability {4466}
C7.1 Industrial Engine Engine Stopping
C4.4 Industrial Engine Electrical System
C11 and C13 Engines for Caterpillar Built Machines General Information
C11 and C13 Engines for Caterpillar Built Machines Lubrication System
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
3126B Petroleum Engine Injection Actuation Pressure - Test