C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Caterpillar

Disassembly Procedure

Start By:

1. Remove the camshaft assembly. Refer to Disassembly and Assembly, "Camshaft - Remove".

Show/hide table

Illustration 1	g01113616
Typical example

1. Use a suitable puller to remove the camshaft gear (5) from the camshaft (1).

   Note: The camshaft gear should be positioned on a suitable support in order to prevent damage to the governor flyweights during disassembly.

2. Remove the spacer (4) and the woodruff key (2) from the camshaft (1).

3. Use a suitable puller to remove the front camshaft bearing (3) from the camshaft (1).

   Note: Identify the orientation of the camshaft bearing (3) for installation.

4. Inspect all of the components for wear or damage. Replace any components that are worn or damaged.