2006/02/06 Caterpillar


Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}

Usage:

769C 01X

Information for equipment:


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260} Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052} Installation Instructions for Turbochargers {1052}

Inlet Air And Exhaust Lines 3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger 3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger 4MF 3408 VEHICULAR ENGINE
Turbocharger 3408E and 3412E Engines for Caterpillar Built Machines

Reuse and Salvage for Turbochargers {0760, 0767, 1052} Reuse and Salvage for Turbochargers {0760, 0767, 1052}

Turbocharger - Inspect 3408E and 3412E Engines for Caterpillar Built Machines

Turbocharger (4MF) SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Air Conditioning Compressor 769, 773B, & 777 TRUCKS OPERATOR'S STATION
Turbocharger (4MF) 3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Turbocharger - Disassemble 3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Assemble 3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Remove 3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Install 3408E and 3412E Engines for Caterpillar Built Machines

New Exhaust Manifold Group And Air Lines Group Used To Prevent Exhaust Leakage{1059,1061} 1980/11/17
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307} 1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061} 1981/09/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250} 1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077} 1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053} 1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412} 1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053} 1977/01/24
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052} 1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052} 1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318} 1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052} 1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077} 1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052} 1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052} 1978/10/09
New Design Exhaust Gasket Used In Air Lines Group{1061} 1979/04/30
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053} 1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053} 1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052} 1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682} 1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053} 1979/10/22
Tightening Procedure For Turbocharger Compressor Nut{1052,1060} 1989/09/18
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307} 1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052} 1993/07/26
New Seal Used In Air Lines Group {1058} 1994/03/21
Adapter Added To The Oil Cooler Lines Group{1365,1380} 1995/12/11
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065} 2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052} 2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307} 2006/02/20
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307} 2005/06/27
Troubleshooting the Wastegate Canister {1052, 1057} 2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22


Machine Engines:
  • All
  • Service Magazine SEPD0764-00, December 2004, "Magnetic Cover for the Turbocharger Oil Supply Line". Disregard this article. See the article that follows.


    Illustration 1g01238585

    Magnetic Cover Media Number SELD0271

    All turbocharger cartridges are now shipped with a magnetic cover for the oil supply line. This new cover will help keep dirt out of the opening for the turbocharger oil supply. Do not remove the magnetic cover prior to the installation of the oil supply line. The magnets can be saved for use during future removals of turbochargers.

    Caterpillar Information System:

    2005/01/10 Procedure to Identify which COM PORT the USB Device Is Occupying and the Procedure to Change the Default COM PORT Setting {7606}
    2006/02/06 Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
    2006/02/01 Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
    3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Install
    3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Remove
    3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Remove
    3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Install
    3500 Engines Connecting Rod Bearings - Remove and Install
    2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
    2004/12/20 New PC Service Tool Software Released for Cellular Based Product Link {7620}
    2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" and Systems Operation, Testing and Adjust, "Product Link PL102C" {7602}
    3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Install
    C7 <BR>Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
    3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Disassemble
    3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Assemble
    3508C, 3512C and 3516C Marine Engines Flywheel - Remove and Install
    3126B Petroleum Engine Diagnostic Code Cross Reference
    2004/12/01 New Lockwasher Will Improve Varistor Reliability {4466}
    3126B Petroleum Engine Injection Actuation Pressure - Test
    3500 and 3500B Engines Reference Numbers
    Installation of 262-6141 Alarm Gp {7406} Installation of 262-6141 Alarm Gp {7406}
    2004/12/01 Lifting Brackets and Hardware are Available {1122}
    3508C, 3512C and 3516C Marine Engines Piston Cooling Jets - Remove and Install
    2004/12/01 The Engine Oil Recommendation for 3500 Series Diesel Engines has Changed {1300}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.