2004/12/20 Caterpillar

Agricultural Tractor:

All

Articulated Truck:

All

Asphalt Paver:

All

Backhoe Loader:

All

Challenger:

All

Cold Planer:

All

Combine:

All

Compact Wheel Loader:

ALL

Earthmoving Compactor:

All

Excavator:

All

Forest Products:

All

Integrated Toolcarrier:

All

Landfill Compactor:

All

Load Haul Dump:

All

Mini Hydraulic Excavator:

All

Motor Grader:

All

Multi Terrain Loader:

All

Off-Highway Truck/Tractor:

All

Paving Compactor:

All

Pipelayer:

All

Road Reclaimer/Soil Stabilizer:

All

Skid Steer Loader:

All

Soil Compactor:

All

Telehandler:

All

Track-Type Loader:

All

Track-Type Skidder:

All

Track-Type Tractor:

All

Wheel Dozer:

All

Wheel Feller Buncher:

All

Wheel Loader:

All

Wheel Skidder:

All

Wheel Tractor-Scraper:

All

Download the Software

A new version of PC Service Tool (EERE5001 ver. 1.0.2) can now be downloaded from the Caterpillar SISweb Internet site. To download the new version of PC Service Tool, perform the following steps:

Show/hide table



Illustration 1	g01129738

1. From the main SISweb page under the "Highlights" Section, click on "Downloads". From "Downloads", scroll down to "Additional Downloads".

Show/hide table



Illustration 2	g01129742

2. Select "PL102C Service Tool ".

Save the file to a folder. Record the folder location where the file was saved.

Uninstall the Old Software

If you have previously installed an earlier version of the Product Link PL102C Service Tool, you must first uninstall the older version. To uninstall the older software, perform the following steps:

1. Click on "Start", "Settings", "Control Panel", and "Add/Remove Programs".

Show/hide table



Illustration 3	g01129842

2. Scroll down the "Add/Remove Programs" list until you locate the Caterpillar Service Tool. Click on "Remove". Answer Yes to the pop-up "Are you sure you want to remove?".

Illustration 4	g01131004

Install the New Software

Perform the following steps to install the new PL102C Service Tool Software:

Show/hide table



Illustration 5	g01129848

1. Locate the previously saved zip file. Extract the compressed files and double-click on "Setup.exe". An icon will be placed on your desktop as shown in Illustration 6.

Show/hide table



Illustration 6	g01129880

2. Connect the 249-6476 serial cable and start the PC Service Tool application.

3. Verify/Set the Product Watch. For configuration information, refer to Systems Operations, RENR8115, "Product Link PL102C", "Configure PL102C Module Property Parameters".