3500 Engines Caterpillar


Turbocharger - Disassemble - Type 2

Usage:

3516C 9F4

拆解步骤

开始:

  1. 拆下涡轮增压器。 请参阅拆解和组装, "涡轮增压器 - 拆卸"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

不要试图拆解涡轮增压器芯组件。 涡轮增压器芯组件不能进行现场维修,应作为一个整体进行更换。





图 1g01117411

  1. 将涡轮增压器安置在工作台上。 将对齐标记置于压缩机壳体 (6) 、涡轮增压器芯 (4) 和涡轮机壳体 (1) 上。

  1. 拆下螺栓 (3) 和夹板 (2) 。 将涡轮壳体 (1) 和涡轮增压器芯 (4) 分离。 从涡轮增压器芯拆下 O 形密封圈。

  1. 卸下螺栓 (5) 。 将涡轮增压器芯 ( 4 ) 从压缩机壳体 (6 ) 分离。

Caterpillar Information System:

3500 Engines Turbocharger - Assemble - Type 2
C-10 Petroleum Engine General Information
3412E Petroleum Engine Electronic Unit Injector - Adjust
3412E Petroleum Engine Electronic Unit Injector - Test
3126B Petroleum Engine Can Not Reach Top Engine RPM
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Electronic Control Module (ECM) - Replace
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Electronic Control Module (ECM) - Configure
C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Electronic Control Module (ECM) - Flash Program
PL1000E Communication ECM Wiring Harness (Short Circuit) - Test
PL1000E Communication ECM Wiring Harness (Open Circuit) - Test
C-10 Petroleum Engine Housing (Front)
3412E Petroleum Engine Inlet Manifold Pressure - Test
3412E Petroleum Engine Engine Valve Lash - Inspect/Adjust
3500 Engines Turbocharger - Disassemble - Type 1
3500 Engines Turbocharger - Assemble - Type 1
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
C9 Engine for Caterpillar Built Machines CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3412E Petroleum Engine Flywheel - Inspect
325D and 329D Excavators and 325D Material Handler Machine System Specifications Heater and Air Conditioner Mounting
3508C, 3512C and 3516C Marine Engines Gear Group (Rear) - Remove
3412E Petroleum Engine Vibration Damper - Check
C-10 Petroleum Engine Engine Valve Lash - Inspect/Adjust
3508C, 3512C and 3516C Marine Engines Gear Group (Rear) - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.