Piston Pump (Propel) - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | FT-3020     | Spring Compressor     | 1     |
B     | FT-3019     | Retainer Ring Remover Installer     | 1     |
C     | 1P-1861     | Retaining Ring Pliers     | 1     |
D     | 1P-1863     | Retaining Ring Pliers     | 1     |
E     | 1P-1858     | Retaining Ring Pliers     | 1     |
F     | 1P-0510     | Driver Gp     | 1     |
Start By:
- Remove the pump. Refer to Disassembly and Assembly, "Piston Pump (Propel) - Remove".
- Remove nut (2) and coil assembly (1) .
Show/hide table
Illustration 1 | g01113848 |
- Remove cartridge assembly (3) .
Show/hide table
Illustration 2 | g01113849 |
- Remove bolts (4) and head (5) .
Show/hide table
Illustration 3 | g01113852 |
- Remove O-ring seal (6) .
Show/hide table
Illustration 4 | g01113853 |
- Remove fitting assembly (7) .
Show/hide table
Illustration 5 | g01113855 |
- Remove bolts (8) and cover (9) .
Show/hide table
Illustration 6 | g01113856 |
- Use Tooling (C) in order to remove retaining ring (10) .
Show/hide table
Illustration 7 | g01113857 |
- Remove cover (11) .
- Remove seal (12) from cover (11) .
Show/hide table
Illustration 8 | g01113858 |
- Remove O-ring seal (13) and shaft (14) .
Show/hide table
Illustration 9 | g01113859 |
- Use Tooling (D) in order to remove retaining ring (15) .
Show/hide table
Illustration 10 | g01113861 |
- Remove bearing (16) from shaft (14) .
- Use Tooling (D) in order to remove retaining ring (17) from shaft (14) .
Show/hide table
Illustration 11 | g01113862 |
- Remove pin assemblies (18) .
Show/hide table
Illustration 12 | g01113867 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Install Tooling (A) in order to compress the barrel assembly.
- Remove bearing (20), bearing race (21), and swashplate (19) .
Show/hide table
Illustration 13 | g01113868 |
- Remove block (22) and bearing race (23) .
Show/hide table
Illustration 14 | g01113869 |
- Remove Tooling (A) .
Show/hide table
Illustration 15 | g01113870 |
- Remove barrel assembly (24) .
- Remove pistons (25) and retainer (26) from the barrel assembly.
Show/hide table
Illustration 16 | g01113871 |
- Remove pistons (25) from retainer (26) .
Show/hide table
Illustration 17 | g01113872 |
- Remove bearing (27) from barrel assembly (24) .
Show/hide table
Illustration 18 | g01113873 |
- Remove pins (28) .
Show/hide table
Illustration 19 | g01113874 |
- Use Tooling (B), Tooling (E), and a suitable press in order to remove retaining ring (29) .
Show/hide table
Illustration 20 | g01113876 |
Show/hide table
Illustration 21 | g01113879 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove washer (32), spring (31), and washer (30) from barrel assembly (24) .
- Remove bolts (32), cover (33), and the O-ring seal.
Show/hide table
Illustration 22 | g01114059 |
- Remove bolts (34) and cover (35) .
Show/hide table
Illustration 23 | g01114060 |
- Remove nut (38), washer (37), and piston assembly (36) from cover (35) .
Show/hide table
Illustration 24 | g01114062 |
- Remove O-ring seal (39) from cover (35) .
Show/hide table
Illustration 25 | g01114063 |
- Use Tooling (C) in order to remove retaining ring (40) .
Show/hide table
Illustration 26 | g01114065 |
- Remove nuts (43), washer (42), and spring (41) from bolt (44) .
Show/hide table
Illustration 27 | g01114067 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove nut (45) and the setscrew.
Show/hide table
Illustration 28 | g01114069 |
- Remove port plate (46) .
Show/hide table
Illustration 29 | g01114070 |
- Remove nut (47) and the setscrew.
Show/hide table
Illustration 30 | g01114071 |
- Remove bearing (48) .
Show/hide table
Illustration 31 | g01114072 |
Caterpillar Information System:
16M Series 3 and 18M Series 3 Motor Graders Wheel Lean Bearings - Lubricate
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Muffler - Remove and Install
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
12M, 140M and 160M Motor Graders Hydraulic and Steering System Visual Inspection
583T Pipelayer Engine Supplement Prelubrication Oil Pump - Remove
416E, 420E and 430E Backhoe Loaders Power Train System Pressure - Release
267B, 277B and 287B Multi Terrain Loaders Machine Systems General Information
AP-1055D and BG-2455D Asphalt Pavers Lifting and Tying Down the Machine
Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070}
C27 and C32 Tier 4 Engines Engine Design
267B, 277B and 287B Multi Terrain Loaders Machine Systems Pilot Operated Hydraulic Control
C11 and C13 Engines Flywheel Housing
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Piston Pump (Propel) - Assemble
AP-1055D and BG-2455D Asphalt Pavers Daily Inspection
583T Pipelayer Engine Supplement Prelubrication Oil Pump - Install
12H, 140H and 160H Motor Graders Power Train Tandem and Cover - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Remove
143H and 163H Motor Graders Power Train Tandem and Cover - Remove and Install
C9 Engines for Caterpillar Built Machines Vibration Damper and Pulley
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Disassemble
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Assemble
2004/11/08 New Engine Software Corrects Warnings of Air Filter Inlet Air Restriction {7620}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Install
PS-360C Pneumatic Compactor Machine System Additive Spray System Troubleshooting