16M Series 3 and 18M Series 3 Motor Graders Caterpillar


Wheel Lean Bearings - Lubricate

Usage:

18M3 E9W
Catatan: Caterpillar menyarankan penggunaan gemuk molibdenum 5% untuk melumasi bantalan kecondongan roda. Rujuk ke Publikasi Khusus, SEBU6250, "Caterpillar Machine Fluids Recommendations" untuk informasi selengkapnya mengenai gemuk molibdenum.

Bearing Kecondongan Roda

Usap fitting sebelum menerapkan pelumas melalui fitting.



Ilustrasi 1g01299841
Tampilan Contoh Khas
Roda telah dilepas untuk melapangkan pandangan.

Tiap roda depan memiliki dua fitting. Berikan pelumas yang tepat ke fitting untuk melumas bantalan miring roda.

Bearing Batang Kecondongan Roda

Usap fitting sebelum menerapkan pelumas melalui fitting.



Ilustrasi 2g01113822
Tampilan Contoh Khas
Roda telah dilepas untuk melapangkan pandangan.

Setiap roda depan memiliki fitting. Terapkan pelumas yang sesuai melalui fitting untuk melumasi bantalan batang kecondongan roda.

Bearing Silinder Kecondongan Roda

Usap fitting sebelum menerapkan pelumas melalui fitting.



Ilustrasi 3g01299845
Tampilan Contoh Khas
Roda telah dilepas untuk melapangkan pandangan.

Roda kanan depan memiliki dua fitting di silinder kecondongan roda. Terapkan pelumas yang sesuai melalui fitting untuk melumasi bantalan silinder keconrongan roda.

Caterpillar Information System:

414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Muffler - Remove and Install
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
12M, 140M and 160M Motor Graders Hydraulic and Steering System Visual Inspection
583T Pipelayer Engine Supplement Prelubrication Oil Pump - Remove
416E, 420E and 430E Backhoe Loaders Power Train System Pressure - Release
267B, 277B and 287B Multi Terrain Loaders Machine Systems General Information
AP-1055D and BG-2455D Asphalt Pavers Lifting and Tying Down the Machine
Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070}
C27 and C32 Tier 4 Engines Engine Design
267B, 277B and 287B Multi Terrain Loaders Machine Systems Pilot Operated Hydraulic Control
C11 and C13 Engines Flywheel Housing
725, 730 and 730 EJECTOR Articulated Trucks Power Train Interaxle Differential Troubleshooting
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Piston Pump (Propel) - Disassemble
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Piston Pump (Propel) - Assemble
AP-1055D and BG-2455D Asphalt Pavers Daily Inspection
583T Pipelayer Engine Supplement Prelubrication Oil Pump - Install
12H, 140H and 160H Motor Graders Power Train Tandem and Cover - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Remove
143H and 163H Motor Graders Power Train Tandem and Cover - Remove and Install
C9 Engines for Caterpillar Built Machines Vibration Damper and Pulley
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Disassemble
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Assemble
2004/11/08 New Engine Software Corrects Warnings of Air Filter Inlet Air Restriction {7620}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.