System Pressure - Release
- Park on a level surface. If you must park on a grade, chock the machine.
- Apply the service brake in order to stop the machine. Move the transmission control lever to the NEUTRAL position.
- Move the speed control lever to the LOW IDLE position.
- Engage the parking brake.
- Engage the transmission neutral lock.
- Lower all attachments to the ground.
- Stop the engine.
- Turn the engine start switch key to OFF position for 4 seconds.
- Turn the engine start switch key back to ON position.
- Press the hydraulic shutoff switch to the ON position.
- Move the hydraulic control levers back and forth in order to relieve hydraulic pressure.
- Move the hydraulic control levers to the HOLD position.
- Turn the engine start switch to OFF position and remove the key.
Caterpillar Information System:
267B, 277B and 287B Multi Terrain Loaders Machine Systems General Information
AP-1055D and BG-2455D Asphalt Pavers Lifting and Tying Down the Machine
Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070}
C27 and C32 Tier 4 Engines Engine Design
267B, 277B and 287B Multi Terrain Loaders Machine Systems Pilot Operated Hydraulic Control
C11 and C13 Engines Flywheel Housing
725, 730 and 730 EJECTOR Articulated Trucks Power Train Interaxle Differential Troubleshooting
14M Motor Grader Cooling System Pressure Cap - Clean/Replace
14M Motor Grader Cooling System Coolant Extender (ELC) - Add
2004/11/08 Testing and Adjusting the High Flow XPS Auxiliary Hydraulic System Pressure {5050}
14M Motor Grader Specifications
725, 730 and 730 EJECTOR Articulated Trucks Power Train Transmission Planetary Troubleshooting
583T Pipelayer Engine Supplement Prelubrication Oil Pump - Remove
12M, 140M and 160M Motor Graders Hydraulic and Steering System Visual Inspection
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Muffler - Remove and Install
16M Series 3 and 18M Series 3 Motor Graders Wheel Lean Bearings - Lubricate
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Piston Pump (Propel) - Disassemble
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Piston Pump (Propel) - Assemble
AP-1055D and BG-2455D Asphalt Pavers Daily Inspection
583T Pipelayer Engine Supplement Prelubrication Oil Pump - Install
12H, 140H and 160H Motor Graders Power Train Tandem and Cover - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Remove
143H and 163H Motor Graders Power Train Tandem and Cover - Remove and Install