Pilot Operated Hydraulic Control
Show/hide table
Illustration 1 | g01113708 |
(1) Orient the strap in the position that is shown. Securely tighten the strap around the bottom of the boot.
(2) Before installation, apply 7M-7456 Bearing Mount Compound to the threads. Torque for the nut ... 40 ± 5 N·m (30 ± 4 lb ft)
(3) Before installation, apply 7M-7456 Bearing Mount Compound to the threads on the cam assembly. Torque for the cam assembly ... 40 ± 5 N·m (30 ± 4 lb ft)
(4) 195-9700 Solenoid Valve Gp
- Nominal voltage for operation ... 12 VDC
- Maximum voltage for actuation with a temperature of 121 °C (250 °F) ... 14.5 VDC
- Minimum voltage for actuation with the coil at 25 °C (77 °F) ... 9 VDC
- Maximum wattage for continuous duty with the coil at a temperature of 121 °C (250 °F) ... 13.3 Watts
- Resistance for the coil at a temperature of 25° ± 5°C (77° ± 9°F) ... 10.0 ± 0.5 Ohms
- Maximum voltage for actuation with a temperature of 121 °C (250 °F) ... 14.5 VDC
(5) When you hold the cam to a plunger, a gap develops between the cam and the plunger on the opposite side of the cam. The distance between the cam and the plunger ... 0.10 ± 0.10 mm (0.004 ± 0.004 inch)
Caterpillar Information System:
C11 and C13 Engines Flywheel Housing
725, 730 and 730 EJECTOR Articulated Trucks Power Train Interaxle Differential Troubleshooting
14M Motor Grader Cooling System Pressure Cap - Clean/Replace
14M Motor Grader Cooling System Coolant Extender (ELC) - Add
2004/11/08 Testing and Adjusting the High Flow XPS Auxiliary Hydraulic System Pressure {5050}
14M Motor Grader Specifications
725, 730 and 730 EJECTOR Articulated Trucks Power Train Transmission Planetary Troubleshooting
725, 730 and 730 EJECTOR Articulated Trucks Power Train Retarder Troubleshooting
725, 730 and 730 EJECTOR Articulated Trucks Power Train Torque Converter Troubleshooting
C15 and C18 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
2004/10/18 A New Panel Improves Accessibility Of Fuses And Relays {1417, 1420, 1422}
267B, 277B and 287B Multi Terrain Loaders Machine Systems Pump Mounting (Hydrostatic)
C27 and C32 Tier 4 Engines Engine Design
Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070}
AP-1055D and BG-2455D Asphalt Pavers Lifting and Tying Down the Machine
267B, 277B and 287B Multi Terrain Loaders Machine Systems General Information
416E, 420E and 430E Backhoe Loaders Power Train System Pressure - Release
583T Pipelayer Engine Supplement Prelubrication Oil Pump - Remove
12M, 140M and 160M Motor Graders Hydraulic and Steering System Visual Inspection
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Muffler - Remove and Install
16M Series 3 and 18M Series 3 Motor Graders Wheel Lean Bearings - Lubricate
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Piston Pump (Propel) - Disassemble
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Piston Pump (Propel) - Assemble