Caterpillar engines are identified with serial numbers, with performance specification numbers, and with arrangement numbers. In some of the cases, modification numbers are used. These numbers are shown on the Serial Number Plate and the Information Plate that are mounted on the engine.
Caterpillar dealers need these numbers in order to determine the components that were included with the engine. This permits accurate identification of replacement part numbers.
| |
| Illustration 1 | g01097972 |
The Serial Number Plate is on the left side of the cylinder block between the two rear crankcase covers. The following information is stamped on the Serial Number Plate: engine serial number, model and arrangement number.
| |
| Illustration 2 | g01097973 |
The Information Plate is on the right side of the cylinder block between the second and third crankcase covers from the rear of the engine. The following information is stamped on the Information Plate: engine's maximum altitude, horsepower, high idle, full load rpm, fuel settings and other information.