G3408C and G3412C Engines Caterpillar


Camshaft Bearings

Usage:

G3408C 3WR


Illustration 1g03320435
Front view


Illustration 2g03320436
Right side view

Table 1
Specification for 110-3779 Cylinder Block 
Item  Qty  Part  Specification Description 
Install the bushings with the oil hole in the bushings on the horizontal center line. Make sure that the position of the bushing joints is above the oil holes. 
4N-6658 Bushing  Bore in the bushing after assembly is 69.969 ± 0.048 mm (2.7547 ± 0.0019 inch)
4N-0685 Bushing  Bore in the bushing after assembly is 69.982 ± 0.061 mm (2.7552 ± 0.0024 inch)
During assembly, install the camshaft bushing to the following dimension: 
Dimension is 803.1 mm (31.62 inch)
Dimension is 593.9 mm (23.38 inch)
Dimension is 409.7 mm (16.13 inch)
Dimension is 225.6 mm (8.88 inch)
Dimension is 4.6 mm (0.18 inch)

Caterpillar Information System:

UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Modem
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Sample - Obtain
G3406 Engines Camshaft Bearings
UPS 250 and UPS 300 Uninterruptible Power Supplies Ethernet Interface
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies UPS View Software
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Serial Number Plate
2010/03/22 A New Head Gasket is Now Available as Service Replacement on Certain 3406E Engines {1124}
UPS 250 and UPS 300 Uninterruptible Power Supplies Starting and Stopping
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Machine Preparation for Troubleshooting
G3408 and G3412 Engines Magneto
C15 and C18 Industrial Engines Housing (Front) - Install
C15 and C18 Industrial Engines Housing (Front) - Remove
G3408 and G3412 Engines Camshaft Bearings
G3606 and G3608 Engines Plate Locations and Film Locations
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Related Options
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Specifications
345C MHPU Mobile Hydraulic Power Unit Engine Oil Level - Check
2004/08/01 New Gasket for the Turbocharger Oil Line {1052, 1307}
Installation Guide for Product Link PL121SR and PL321{7606} Installation Guide for Product Link PL121SR and PL321{7606}
G3500B Engines Exhaust Bypass Valve - Adjust
C15 Petroleum Generator Set Engines Aftercooler - Test
C15 Petroleum Generator Set Engines Cooling System - Inspect
3456 Generator Sets Refill Capacities and Recommendations
G3500B Engines Air/Fuel Ratio Control - Adjust - Oxygen Feedback - Generator Set Application
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.