TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Caterpillar


Machine Preparation for Troubleshooting

Usage:

TH48-E70 JGC

------ WARNING! ------

在调试变速箱传动系统时,把机器开到没有障碍物和安全通风排气的地方。 机器的突然动作或在压力下放油,可能对机上或机器附近人员造成伤害。 为避免造成伤害,在调试变速箱传动系统之前,必须遵照下列程序。


  1. 把机器开到平整水平的地方。 远离正在工作的所有机器和所有工作人员。

  1. 确保变速箱控制处于空档位置。 关闭发动机。

  1. 机器上仅允许停留一位操作员。 让其他人员远离机器或保持在操作员的视野范围内。

  1. 在任何接头、软管或者部件上工作之前,确保释放所有机油压力。

目测是故障诊断的第一步。 目测能找出可快速排除的故障。 如果目测没有发现任何问题,则下一步进行操作检查。 操作检查可识别机器在操作期间出现的可能故障。

Caterpillar Information System:

G3408 and G3412 Engines Magneto
C15 and C18 Industrial Engines Housing (Front) - Install
C15 and C18 Industrial Engines Housing (Front) - Remove
C15 On-highway Engine Compression Brake - If Equipped
G3500B Engines Sensors and Electrical Components
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Power Train Hydraulic System
345C MHPU Mobile Hydraulic Power Unit Condenser (Refrigerant) - Clean
UPS 250 and UPS 300 Uninterruptible Power Supplies Modes Of Operation
C15 and C18 Industrial Engines Fuel Filter Base - Install
C15 Petroleum Generator Set Engines Engine Oil Pressure - Test
C11 and C13 Petroleum Engines Fuel System - Prime
3412E, C30 and C32 Marine Engines Crankshaft - Install
UPS 250 and UPS 300 Uninterruptible Power Supplies Starting and Stopping
2010/03/22 A New Head Gasket is Now Available as Service Replacement on Certain 3406E Engines {1124}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Serial Number Plate
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies UPS View Software
UPS 250 and UPS 300 Uninterruptible Power Supplies Ethernet Interface
G3406 Engines Camshaft Bearings
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Sample - Obtain
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Modem
G3408C and G3412C Engines Camshaft Bearings
G3408 and G3412 Engines Camshaft Bearings
G3606 and G3608 Engines Plate Locations and Film Locations
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Related Options
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.