Cylinder Liner
Show/hide table
图 1 | g02543584 |
缸套外径 (1) 缸套 (2) 缸套密封件 |
Show/hide table
197-9330 缸套 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
A     | -     | -     | 直径为 151.42 ± 0.05 mm (5.961 ± 0.002 in)。     |
B     | -     | -     | 直径为 147.90 ± 0.03 mm (5.823 ± 0.001 in)。     |
C     | -     | -     | 直径为 141.38 ± 0.08 mm (5.566 ± 0.003 in)。     |
-     | -     | -     | 装配之前,将 5P-3975 橡胶润滑剂 涂抹到缸套密封件上。     |
Caterpillar Information System:
C15 and C18 Industrial Engines Exhaust Elbow - Remove and Install
C15 and C18 Industrial Engines Turbocharger - Install - Dual Turbocharger
C15 and C18 Industrial Engines Turbocharger - Remove - Dual Turbocharger
G3408 and G3412 Engines Carburetor Control Linkage
G3408 and G3412 Engines Carburetor Control Linkage
Installation and Initial Start-Up Procedure For G3520B Industrial Engines{1000} Installation and Initial Start-Up Procedure For G3520B Industrial Engines{1000}
3412E, C30 and C32 Marine Engines Connecting Rod Bearings - Remove
G3408 and G3412 Engines Carburetor Control Linkage
2004/08/01 A New Head Gasket is Now Available as Service Replacement {1124}
3412E, C30 and C32 Marine Engines Pistons and Connecting Rods - Remove
G3520B Industrial Engine MID 036 - CID 0102 - FMI 08 Boost Pressure Sensor noisy signal
G3520B Industrial Engine Low Power/Poor or No Response to Throttle
C11 and C13 Petroleum Engines Crankshaft Seals
C13, C15, and C18 Tier 4 Final Engines Connecting Rod
G3408C and G3412C Engines Cylinder Head
G3408C and G3412C Engines Cylinder Head
3406E and 3456 Generator Set Engines Fuel System
3408C and 3412C Marine Engines Alternator and Regulator
3412E, C30 and C32 Marine Engines Crankshaft - Remove
C7 Engines for Caterpillar Built Machines Electrical System
3412E, C30 and C32 Marine Engines Crankshaft - Remove
325D and 329D Excavators Storage Box - If Equipped
3406E and 3456 Generator Set Engines Fuel System - Prime
3406E and 3456 Generator Set Engines Electric Starting System - Test