R1300G Load Haul Dump Machine Systems Caterpillar


Vane Pump (Implement, Steering, Pilot and Braking) - Install

Usage:

R1300G LJB

安装步骤

注: 检查 O 形密封圈、垫片和密封件有无磨损或损坏。 如有必要,请更换部件。




    图 1g01091738

  1. 安装 O 形密封圈 (12) 。



    图 2g01091737

  1. 将 O 形密封圈安装到弯头 (9) 上。

  1. 安装弯头 (9) 。 安装四个螺栓 (11) 。

  1. 安装适配器 (8) 和 O 形密封圈。 安装固定适配器 (8) 的四个螺栓。

  1. 将适当的起吊设备连接到叶轮泵 (10) 上。 叶轮泵 (10) 的重量约为 59 kg (130 lb)。

  1. 安装叶轮泵 (10) 。

  1. 安装两个螺栓 (12) 。



    图 3g01091483

  1. 安装管路组件 (3) 。

  1. 安装两颗螺栓 (7) 。 拧紧两个卡箍 (6) 。



    图 4g01091484

  1. 安装接头 (5) 。 将软管组件连接至接头 (5) 。

  1. 连接管组件 (3) 。

  1. 连接软管组件 (2) 和 (4) 。

  1. 安装护罩 (1) 。 安装固定护罩 (1) 的两个螺栓。

  1. 向液压油箱注油。 有关液压油箱的容量,请参阅操作和保养手册, "容量(再加注)"。 有关正确的加注步骤,请参阅操作和保养手册, "液压系统机油 – 更换"。

End By:

  1. 安装空气滤清器。 请参阅 拆解和组装, "空气滤清器 - 拆卸和安装"。
  2. 拆下转向机架锁。 请参阅 拆解和组装, "转向机架锁 - 拆卸和安装"。

Caterpillar Information System:

CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Radiator Core - Clean
446D Backhoe Loader Machine Systems Bucket - Remove and Install
797 Off-Highway Truck Front Axle Breather - Replace
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector
C15 Petroleum Generator Set Engines Fuel Transfer Pump
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Disassemble
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Install
252-9310 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250} 252-9310 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250}
R2900G Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Install
R1300G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Remove
C15 and C18 Industrial Engines Flywheel Housing - Remove and Install
R1600G Load Haul Dump Machine Systems Hydraulic Tank - Disassemble
R1600G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Disassemble
R1300G Load Haul Dump Machine Systems Neutralizer Valve (STIC Steering) - Remove and Install
R1300G Load Haul Dump Machine Systems Neutralizer Valve (Implement and Steering) - Remove and Install
725 and 730 Articulated Trucks Machine Systems Steering System Troubleshooting
R1300G Load Haul Dump Machine Systems Pilot Valve (STIC Steering) - Remove
R1600G Load Haul Dump Machine Systems Hydraulic Tank - Assemble
725 and 730 Articulated Trucks Machine Systems Hoist System Troubleshooting
725 and 730 Articulated Trucks Machine Systems Piston Pump (Steering, Hoist) - Test and Adjust
725 and 730 Articulated Trucks Machine Systems Piston Pump (Brake, Hoist, Fan) - Test and Adjust
725 and 730 Articulated Trucks Machine Systems Electric Drive Pump (Secondary Steering) - Check
725 and 730 Articulated Trucks Machine Systems Service Brake Air - Purge
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.