Gear Pump (Steering) - Assemble
Assembly Procedure
Show/hide table
Illustration 1 | g01091604 |
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
- Install driven gear (19) and idler gear (18) in body (17) .
Note: Install idler gear (18) in the original orientation.
- Install bearing (20) in body (17) .
- Install O-ring seal (21) in body (17) .
- Install cover (22) on body (17) .
- Install studs (8) .
- Install shaft seal (23), tab washer (24), and shaft seal (25) in cover (22) .
- Install retainer (4) and bearing (16) in body (17) .
- Install O-ring seals (3) and rings (2) in body (17) .
- Install body (9) and nuts (7) .
- Install O-ring seal (6) on plug (5) .
- Install plug (5) in body (9) .
- Install spring (10), orifice (11), spool (12), and orifice (13) in body (9) .
- Install O-ring seal (15) on plug (14) .
- Install plug (14) in body (9) .
Caterpillar Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Radiator Core - Clean
446D Backhoe Loader Machine Systems Bucket - Remove and Install
797 Off-Highway Truck Front Axle Breather - Replace
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector
C15 Petroleum Generator Set Engines Fuel Transfer Pump
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Disassemble
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Install
252-9310 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250} 252-9310 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250}
R2900G Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Install
R1300G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Remove
C15 and C18 Industrial Engines Flywheel Housing - Remove and Install
Bench Test Procedure for a 776 and 777 Off-Highway Truck Transmission {3030, 3073} Bench Test Procedure for a 776 and 777 Off-Highway Truck Transmission {3030, 3073}
R1300G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Install
R1600G Load Haul Dump Machine Systems Hydraulic Tank - Disassemble
R1600G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Disassemble
R1300G Load Haul Dump Machine Systems Neutralizer Valve (STIC Steering) - Remove and Install
R1300G Load Haul Dump Machine Systems Neutralizer Valve (Implement and Steering) - Remove and Install
725 and 730 Articulated Trucks Machine Systems Steering System Troubleshooting
R1300G Load Haul Dump Machine Systems Pilot Valve (STIC Steering) - Remove
R1600G Load Haul Dump Machine Systems Hydraulic Tank - Assemble
725 and 730 Articulated Trucks Machine Systems Hoist System Troubleshooting
725 and 730 Articulated Trucks Machine Systems Piston Pump (Steering, Hoist) - Test and Adjust
725 and 730 Articulated Trucks Machine Systems Piston Pump (Brake, Hoist, Fan) - Test and Adjust
725 and 730 Articulated Trucks Machine Systems Electric Drive Pump (Secondary Steering) - Check