Diverter Valve (Secondary Steering) - Install
Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
- Attach a suitable lifting device to secondary steering diverter valve (1). The weight of the secondary steering diverter valve (1) is approximately 44 kg (97 lb).
Show/hide table
Illustration 1 | g01091155 |
View of the right side of the rear frame |
- Position secondary steering diverter valve (1) and install three bolts (9), the washers and the spacers.
- Connect electrical harness (8) .
- Connect hose assemblies (7) and (10) .
- Connect hose assembly (5) to secondary steering diverter valve (1) .
Show/hide table
Illustration 2 | g01091154 |
View of the right side of the rear frame |
- Install elbow (6). Tighten four hose clamps (4) .
- Connect hose assembly (3) to secondary steering diverter valve (1) .
Show/hide table
Illustration 3 | g01091153 |
View from the articulated hitch area |
- Connect hose assembly (1) to secondary steering diverter valve (1) .
Show/hide table
Illustration 4 | g01091151 |
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper filling procedure.
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect.".
Caterpillar Information System:
R1300G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Remove
C15 and C18 Industrial Engines Flywheel Housing - Remove and Install
Bench Test Procedure for a 776 and 777 Off-Highway Truck Transmission {3030, 3073} Bench Test Procedure for a 776 and 777 Off-Highway Truck Transmission {3030, 3073}
446D Backhoe Loader Machine Systems Pilot Valve (Stabilizer) - Assemble
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Vibratory Valve - Disassemble
3500 Industrial Engines Auxiliary Water Pump
446D Backhoe Loader Machine Systems Pilot Valve (Stabilizer) - Disassemble
3508 EUI Engine for Off-Highway Truck/Tractors Water Pump
CB-334E Series II and CB-335E Series II Paving Compactors Tire Inflation Pressure Adjustment
797 Off-Highway Truck Engine Components - Rebuild//Replace/Install Reman - 797 LAA Machines Only
797 Off-Highway Truck Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New - 797 LAA Machines Only
C4.4 (Mech) Industrial Engine Battery or Battery Cable - Disconnect
252-9310 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250} 252-9310 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250}
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Install
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Disassemble
C15 Petroleum Generator Set Engines Fuel Transfer Pump
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector
797 Off-Highway Truck Front Axle Breather - Replace
446D Backhoe Loader Machine Systems Bucket - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Radiator Core - Clean
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Assemble
R1300G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Install
R1600G Load Haul Dump Machine Systems Hydraulic Tank - Disassemble
R1600G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Disassemble