Auxiliary Water Pump
Show/hide table
图 1 | g03111216 |
Show/hide table
技术规格 - 1W-9554 辅助水泵总成、 5N-2605 辅助水泵总成和 334-8471 水泵总成 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 1 | 9X-4594 唇形密封 | 不要润滑唇形密封件的密封唇。 |
2 | 1 | 212-8183 叶轮 | 轴叶轮的孔径为 |
3 | 1 | 430-9695 轴 | 将叶轮 (2) 压装至轴前,在轴上涂一薄层清洁的发动机机油进行润滑。
直径 (D) 为 轴上的止推垫圈槽宽度 (A) 为 |
B | 2 | 423-0938 止推垫圈 | 新止推垫圈的厚度为 |
4 | 1 | 127-5400 衬套 | 装配后,衬套上的辅助传动轴孔径 (C) 为 新辅助传动轴(未显示)的直径为 壳体组件上的安装深度 (E) 为 |
5 | 1 | 9M-3786 O 形密封圈 | 用清洁的发动机机油、甘油或清洁的水润滑 O 形密封圈的孔。 |
6 | 1 | 235-3546 O 形密封圈 | 用密封的密封胶稍稍润滑 O 形密封圈孔。 |
Caterpillar Information System:
C7 Marine Engines Engine Sensors - Remove and Install
C7 Marine Engines Fuel Cooler - Remove and Install
C4.4 (Mech) Industrial Engine Battery or Battery Cable - Disconnect
C4.4 (Mech) Industrial Engine Battery - Replace
3126E Truck Engines Reference Material
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Oil Filter (Transmission)
G3406 Engines Cylinder Head Valves
G3500B Engines Engine Oil Lines
C15 and C18 Industrial Engines Engine Oil Pan - Remove and Install
G3520B Industrial Engine Oxygen Sensor Signal
G3520B Industrial Engine Oxygen Sensor Buffer Supply
3500B High Displacement Air Inlet and Exhaust Lines
G3500 Engines Cooling System Coolant (NGEC) - Change
C15 and C18 Industrial Engines Flywheel Housing - Remove and Install
XQ125 Generator Set Driven Equipment - Check
C15 Petroleum Generator Set Engines Fuel Transfer Pump
C3.3 Industrial Engine Engine Air Cleaner Element (Single Element) - Inspect/Replace
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector
C18 Generator set and C18 Marine Engines Flywheel - Remove
C18 Generator set and C18 Marine Engines Flywheel - Install
G3500 Engines Starting the Engine
C15 and C18 Industrial Engines Camshaft - Install
C15 and C18 Industrial Engines Camshaft - Remove
C13, C15, and C18 Generator Set Engines Speed Control (Switch) - Test