Engine Oil Lines
Show/hide table
图 1 | g01448370 |
右视图 |
Show/hide table
图 2 | g01446065 |
前视图 |
按下列顺序拧紧卡箍螺栓:
- 将卡箍组件 (2) 紧密地紧固至管组件 (4) 。
- 将卡箍组件的两个螺栓 (3) 紧固至弯头 (8) ,至紧固扭矩为 47 ± 9 N·m (35 ± 7 lb ft)。
- 将卡箍组件的两个螺栓 (1) 紧固至管组件 (4) ,至紧固扭矩为 47 ± 9 N·m (35 ± 7 lb ft)。
(5) 用少许清洁的发动机机油润滑七个 O 形密封圈的孔。
(6) 用少许清洁的发动机机油润滑 O 形密封圈塞的孔。
(7) 螺塞的扭矩 ... 100 ± 15 N·m (75 ± 11 lb ft)
Caterpillar Information System:
C15 and C18 Industrial Engines Engine Oil Pan - Remove and Install
G3520B Industrial Engine Oxygen Sensor Signal
G3520B Industrial Engine Oxygen Sensor Buffer Supply
3500B High Displacement Air Inlet and Exhaust Lines
G3520B Industrial Engine Oxygen Sensor - Calibrate
G3520B Industrial Engine Engine Speed/Timing Sensor - Calibrate
C27 and C32 Industrial and Petroleum Engines Intermittent Low Power or Power Cutout
2004/07/01 Some Older Mechanical Unit Injectors are Being Cancelled {1290}
3126E Truck Engines Maintenance Interval Schedule - Engines with a Deep Oil Sump
3126E Truck Engines Maintenance Interval Schedule - Engines with a Shallow Oil Sump
2004/10/01 Reduced Oil Change Intervals {7542}
2004/08/01 Special Instructions Are No Longer Announced In the Engine News {1000}
G3406 Engines Cylinder Head Valves
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Oil Filter (Transmission)
3126E Truck Engines Reference Material
C4.4 (Mech) Industrial Engine Battery - Replace
C4.4 (Mech) Industrial Engine Battery or Battery Cable - Disconnect
C7 Marine Engines Fuel Cooler - Remove and Install
C7 Marine Engines Engine Sensors - Remove and Install
3500 Industrial Engines Auxiliary Water Pump
G3500 Engines Cooling System Coolant (NGEC) - Change
C15 and C18 Industrial Engines Flywheel Housing - Remove and Install
XQ125 Generator Set Driven Equipment - Check
C15 Petroleum Generator Set Engines Fuel Transfer Pump