2005/01/10 Caterpillar


New Triten Bucket Wear Plates Are Available {6120}

Usage:

988G 2TW
Wheel Loader:
988G (S/N: 2TW1-UP; BNH1-UP)

The new Triten bucket wear plates are available. The new plates are a direct replacement for the standard plates on the bucket. The new plates provide better service life in some applications.




Illustration 1g01092020



Illustration 2g01092229

View A-A

(1) Left hand heel plate. (2) Right hand heel plate. (3) Left hand plate. (4) Center plate. (5) Right hand plate.

------ WARNING! ------

Personal injury can result from flame cutting or welding on painted areas.

The effect of gasses from burned paint is a hazard to the person doing the cutting or welding.

Do not flame cut or weld on painted areas.

----------------------

------ WARNING! ------

Personal injury or death can result from fumes, gases and ultraviolet rays from the weld arc.

Welding can cause fumes, burn skin and produce ultraviolet rays.

Keep your head out of the fumes. Use ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing area. Wear eye, ear and body protection before working.

Protect yourself and others; read and understand this warning. Fumes and gases can be dangerous to your health. Ultraviolet rays from the weld arc can injure eyes and burn skin. Electric shock can cause death.

Read and understand the manufacturer's instructions and your employer's safety practices. Do not touch live electrical parts.

See "American National Standard Z49.1, Safety in Welding and Cutting" published by the American Welding Society.

American Welding Society
2501 N.W. 7th Street
Miami, Florida 33125

See "OSHA Safety and Health Standards, 29 CFR 1910", available from U.S. Department of Labor.

U.S. Department of Labor
Washington, D.C. 20210
----------------------

In order to install the plates, weld only on the base plates. DO NOT weld on the Triten wear material.

Table 1
988G Rock Buckets    
Part Number     Part Name     Qty per Bucket    
236-8219     Wear Plate (Right Hand)     1    
236-8220     Wear Plate (Left Hand)     1    
236-8221     Wear Plate Center     1    
236-1656     Wear Plate (Right Hand Heel)     1    
236-1657     Wear Plate (Left Hand Heel)     1    

Table 2
988G General Purpose Buckets    
Part Number     Part Name     Qty per Bucket    
236-1642     Wear Plate (Right Hand)     1    
236-1643     Wear Plate (Left Hand)     1    
236-1644     Wear Plate Center     1    
236-1656     Wear Plate (Right Hand Heel)     1    
236-1657     Wear Plate (Left Hand Heel)     1    

Table 3
988G Penetration Buckets    
Part Number     Part Name     Qty per Bucket    
236-4674     Wear Plate (Right Hand)     1    
236-4675     Wear Plate (Left Hand)     1    
236-4676     Wear Plate Center     1    
236-4689     Wear Plate (Right Hand Heel)     1    
236-4690     Wear Plate (Left Hand Heel)     1    

Caterpillar Information System:

Repairing Track Roller Frames{4151} Repairing Track Roller Frames{4151}
525C, 535C and 545C Wheel Skidders Fuel Tank Cap and Strainer - Clean
D9T Track-Type Tractor Machine Systems Implement Control Valve - Disassemble
525C, 535C and 545C Wheel Skidders Fuel System Primary Filter (Water Separator) Element - Replace
525C, 535C and 545C Wheel Skidders Fuel System Primary Filter (Water Separator) - Drain
525C, 535C and 545C Wheel Skidders Fuel System - Prime
631G and 637G Wheel Tractor-Scrapers Engine Supplement Fan - Remove and Install
C27 and C32 Engines Piston Ring Groove - Inspect
988H Wheel Loader Braking System Brake System Troubleshooting
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
613C Series II Wheel Tractor-Scraper Cooling System Coolant Sample (Level 2) - Obtain
613C Series II Wheel Tractor-Scraper Cooling System Coolant Sample (Level 1) - Obtain
525C, 535C and 545C Wheel Skidders Engine Oil Level - Check
C27 and C32 Engines for Caterpillar Built Machines Electric Starting System - Test
631G and 637G Wheel Tractor-Scrapers Engine Supplement Muffler - Remove and Install
623E Wheel Tractor-Scraper Hydraulic System Hydraulic Tank and Filter
525C, 535C and 545C Wheel Skidders Ether Starting Aid Cylinder - Replace - If Equipped
525C, 535C and 545C Wheel Skidders Battery Hold-Down - Tighten
525C, 535C and 545C Wheel Skidders Battery - Clean
623E Wheel Tractor-Scraper Hydraulic System Oil Filter (Hydraulic)
623E Wheel Tractor-Scraper Hydraulic System Vane Pump (Elevator, Implement)
Installation of the AccuGrade® GPS Electronic Components For Version 6.1{7220} Installation of the AccuGrade® GPS Electronic Components For Version 6.1{7220}
930G Wheel Loader Hydraulic System Pump Performance (Implement) - Test
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Power Train Power Train Hydraulic System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.