Flywheel
Show/hide table
 | |
| Illustration 1 | g01093440 |
(1) Ring Gear (2) Flywheel Bolt | |
(3) Bolts
Tighten the bolts to the following torque value. ... 300 ± 40 N·m (220 ± 30 lb ft)
Caterpillar Information System:
General Service and Repair Safety Information Safety Information
3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter Base
C15 and C18 Engines for Caterpillar Built Machines Fuel System Pressure - Test
G3408 and G3412 Engines Electric Starting Motor
C0.5 and C0.7 Industrial Engines Crushing Prevention and Cutting Prevention
2005/01/31 Tools Are Available for the Installation of Crankshaft Seals and Wear Sleeves {0700}
G3408C and G3412C Engines Emergency Stopping
G3408C and G3412C Engines Starting the Engine
G3408C and G3412C Engines Alarms and Shutoffs
C15 and C18 Engines for Caterpillar Built Machines Exhaust Temperature - Test
2004/12/27 Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
C15 and C18 Engines for Caterpillar Built Machines Aftercooler - Test
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pan
2012/08/30 Improved Locknuts for the High Pressure Turbocharger to Exhaust Manifold Joint Are Available for Certain Truck Engines {1052}
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C27 and C32 Engines Piston Ring Groove - Inspect
G3520B Industrial Engine Engine Speed/Timing Sensor
TK711, TK721, TK722 and TK732 Track Feller Bunchers Seat
3500B Locomotive Engines Cylinder Head Valves
C6.6 Marine Generator Set Generator Installation
3500B High Displacement Generator Set Engines Product Storage
G3520B Industrial Engine Fuel Metering Valve
2008/10/06 New Tubes for Plate Type Heat Exchangers that Are Designed To Order (DTO) {1379}
C9 Marine Generator Set Engines Gear Group (Front) - Time