Gear Pump (Steering)
Show/hide table
Illustration 1 | g01088071 |
(1) Pressure tap
(2) Steering pump (3) Relief valve |
Steering pump (2) is the second in a series of two pumps which are driven by the engine flywheel. The engine drives the propel pump. The steering pump is splined to the propel pump. The engine compartment cover provides access to the steering pump.
The steering pump is a gear pump which produces flow when the engine is operating. Supply flow from the steering pump is controlled by engine speed. The steering pump contains a relief valve (3). The relief valve limits pressure in the steering system to
Caterpillar Information System:
2004/07/19 Correction to Testing and Adjusting , "Operational Checks" {4251, 4278}
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Engine - Remove
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Steering Column - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Exhaust Temperature - Test
2004/12/27 Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
C15 and C18 Engines for Caterpillar Built Machines Aftercooler - Test
797B Off-Highway Truck Daily Inspection
2004/07/26 A New Improved Articulation Lock Pin and a New Hitch are Now Used {7050, 7051}
988H Wheel Loader Power Train Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
R2900G Load Haul Dump Machine Systems Front Frame from Rear Frame - Separate
238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320} 238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320}
2004/08/02 Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
PS-150C Pneumatic Compactor Machine System Metering Pump (Steering)
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Felling Head System - Industrial Tractor
446D Backhoe Loader Machine Systems Swing Frame - Remove
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
446D Backhoe Loader Machine Systems Swing Frame - Install
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Install
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Remove
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Install
PS-150C Pneumatic Compactor Machine System Steering Hydraulic System
2004/12/27 Two New Track Presses Are Now Available {0700, 0729}
988H Wheel Loader Braking System Brake Accumulator - Test and Charge