Steering Column - Remove and Install
Removal Procedure
Start By:
- Remove steering wheel. Refer to Disassembly and Assembly, "Steering Wheel - Remove and Install".
- Remove bolts (1) .
Show/hide table
Illustration 1 | g01087958 |
- Separate steering column (2) from metering pump (3) .
Installation Procedure
- Install steering column (2) in metering pump (3) .
Show/hide table
Illustration 2 | g01087958 |
- Install bolts (1) .
End By: Install steering wheel. Refer to Disassembly and Assembly, "Steering Wheel - Remove and Install".
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Exhaust Temperature - Test
2004/12/27 Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
C15 and C18 Engines for Caterpillar Built Machines Aftercooler - Test
797B Off-Highway Truck Daily Inspection
2004/07/26 A New Improved Articulation Lock Pin and a New Hitch are Now Used {7050, 7051}
988H Wheel Loader Power Train Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
R2900G Load Haul Dump Machine Systems Front Frame from Rear Frame - Separate
238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320} 238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320}
2004/08/02 Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Install
446D Backhoe Loader Machine Systems Stabilizer Cylinder - Remove and Install
446D Backhoe Loader Machine Systems Floorplate - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Engine - Remove
2004/07/19 Correction to Testing and Adjusting , "Operational Checks" {4251, 4278}
PS-150C Pneumatic Compactor Machine System Gear Pump (Steering)
PS-150C Pneumatic Compactor Machine System Metering Pump (Steering)
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Felling Head System - Industrial Tractor
446D Backhoe Loader Machine Systems Swing Frame - Remove
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
446D Backhoe Loader Machine Systems Swing Frame - Install
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Install
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Remove
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Install