2004/12/27 Caterpillar

Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}


769C 01X

Caterpillar Products:
  • All

  • Illustration 1g01087914

    The 243-3130 Contamination Monitor Gp allows the technician to monitor the cleanliness of hydraulic fluid or lubrication oil in systems with a maximum pressure of 689 kPa (100 psi). The contamination monitor group is ideal for use with filter carts. The contamination monitor group can pump a sample of oil from nonpressurized systems or from S·O·S bottles for quick checks of the sample.

    This contamination monitor group provides only ISO cleanliness codes, but this contamination monitor group is a lower cost unit than traditional particle counting equipment. The ISO cleanliness codes can be displayed in 6 micron or 14 micron particle sizes. If the contamination monitor group is connected to a computer, 4 micron particle sizes can also be displayed.

    The contamination monitor group must be used with the 6V-4144 Coupler, the 243-3133 Quick Connect Coupler (Fluid Sampling), or the 210-5530 Coupler .

    The contamination monitor group includes the following equipment: a monitor assembly, a DC power supply, an AC power supply, a communication cable, a software disk, a user's manual and a carrying case.

    Refer to the Tool Operating Manual, NEHS0908 for more information.

    Table 1
    Specifications for the 243-3130 Contamination Monitor Gp    
    Maximum Pressure    
    689 kPa (100 psi)    
    Display     3 digit, ISO cleanliness code (examples: 18/15, 16/13)    
    Monitor     3 channel with integrated piston pump for use on low pressure systems or on nonpressurized systems    
    Power     requires 12 to 30 volts DC    
    AC adapter     input 110 to 250 volts AC/ output 24 volts DC, 80 watts    
    Communications     requires DB9 connector    
    Calibration     ISO-11171    
    Overall size     299 X 203 X 172 mm (11.75 X 8.0 X 6.75 inch)    

    Table 2
    Service Parts for 243-3130 Contamination Monitor Gp    
    Pt. No.     Description    
    243-3131     Power Cable (with Alligator Clips)    
    243-3132     Power Supply (AC Adapter)    
    243-3144     Communication Cable As (RS232)    
    188-0639     Hose As (Low Pressure)    

    Repair Information

    The unit is warranted by the manufacturer for one year from date of receipt. If a unit in North or South America needs servicing, contact the manufacturer's repair facility:


    6721 E. 106th St.
    Tulsa, OK 74133 U.S.A.
    Phone: 918-299-4019Fax: 918-299-7410

    If a unit in Europe or in Asia needs servicing, contact the manufacturer's repair facility:


    Dieselstrasse 10
    D-71277 Rutesheim
    Postfach 1162


    Sintech Scientific (SEA) Pet Ltd.

    No. 196 Pandan Loop #02-18
    Pantech Industrial Complex
    Singapore 128384

    Caterpillar Information System:

    C15 and C18 Engines for Caterpillar Built Machines Aftercooler - Test
    C9 Marine Generator Set Engines Air Inlet and Exhaust System
    G3520B Industrial Engine ECM Status Indicator Output
    G3520B Industrial Engine ECM Output Circuit (Starting Motor)
    C9 Marine Generator Set Engines Fuel System
    G3520B Industrial Engine ECM Output Circuit (Fuel Control)
    2004/12/01 Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
    G3520B Industrial Engine Detonation Sensors
    3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Valve Mechanism
    G3520B Industrial Engine Desired Speed Input (4 - 20 mA)
    C27 and C32 Engines Lubrication System
    G3520B Industrial Engine Compressor Bypass
    C15 and C18 Engines for Caterpillar Built Machines Exhaust Temperature - Test
    G3408C and G3412C Engines Alarms and Shutoffs
    G3408C and G3412C Engines Starting the Engine
    G3408C and G3412C Engines Emergency Stopping
    2005/01/31 Tools Are Available for the Installation of Crankshaft Seals and Wear Sleeves {0700}
    C0.5 and C0.7 Industrial Engines Crushing Prevention and Cutting Prevention
    G3408 and G3412 Engines Electric Starting Motor
    C15 and C18 Engines for Caterpillar Built Machines Fuel System Pressure - Test
    3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter Base
    General Service and Repair Safety Information Safety Information
    C9 Marine Engines and C9 Marine Generator Sets Flywheel
    3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pan
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.