446D Backhoe Loader Machine Systems Caterpillar


Floorplate - Remove and Install

Usage:

446D DBL

Removal Procedure

Start By:

  1. Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".


    Illustration 1g00751735

  1. Remove bolts (1) and plate (2).


    Illustration 2g01087641

  2. Remove bolts (3) and plate (4). Remove cab floor mat (5).


    Illustration 3g00751737

  3. Remove bolts (6) and floorplate (7).


    Illustration 4g00751739

  4. Remove bolts (8).


    Illustration 5g01087644

    Note: Mark the position of pedal assemblies (10) on shafts (9) in order to aid in assembly.

  5. Loosen bolts (11) and remove pedal assemblies (10).


    Illustration 6g01088721

  6. Remove bolts (14) and plate (12). Remove boot (13) and floorplate (15).

Installation Procedure



    Illustration 7g01088721

  1. Install floorplate (15) and boot (13). Use bolts (14) in order to install plate (12).


    Illustration 8g01087644

  2. Install pedal assemblies (10) on shafts (9) to the position that was noted in the disassembly procedure. Tighten bolts (11).


    Illustration 9g00751739

  3. Install bolts (8).


    Illustration 10g00751737

  4. Use bolts (6) in order to install floorplate (7).


    Illustration 11g01087641

  5. Install cab floor mat (5). Use bolts (3) in order to install plate (4).


    Illustration 12g00751735

  6. Use bolts (1) in order to install plate (2).

Caterpillar Information System:

PS-150C Pneumatic Compactor Propel System Relief Valve (Flushing Valve) - Test and Adjust - Machines with Optional Flow Divider
2004/12/01 Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/07/26 A New Solenoid Control is Now Used {1265, 1276, 1408}
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Valve Mechanism
446D Backhoe Loader Machine Systems Piston and Vane Pump - Install
446D Backhoe Loader Machine Systems Piston and Vane Pump - Remove
AP-800D and BG-230D Asphalt Pavers Machine Systems Pump Control Valve (Generator) - Test and Adjust
446D Backhoe Loader Machine Systems Swing Cylinder - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Remove
446D Backhoe Loader Machine Systems Boom - Remove and Install
R2900G Load Haul Dump Machine Systems Seat - Install
R2900G Load Haul Dump Machine Systems Seat - Remove
446D Backhoe Loader Machine Systems Stabilizer Cylinder - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Install
2004/08/02 Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320} 238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320}
R2900G Load Haul Dump Machine Systems Front Frame from Rear Frame - Separate
988H Wheel Loader Power Train Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
2004/07/26 A New Improved Articulation Lock Pin and a New Hitch are Now Used {7050, 7051}
797B Off-Highway Truck Daily Inspection
C15 and C18 Engines for Caterpillar Built Machines Aftercooler - Test
2004/12/27 Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
C15 and C18 Engines for Caterpillar Built Machines Exhaust Temperature - Test
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Steering Column - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.