Piston and Vane Pump - Remove
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-7505 | Hydraulic Jack | 1 |
| ZZ | 9U-7071 | Tapered Cap/Plug | 1 |
| 9U-7072 | Tapered Cap/Plug | 1 | |
| 9U-7090 | Tapered Cap/Plug | 1 | |
| 9U-7091 | Tapered Cap/Plug | 1 | |
| 6V-9830 | Cap As | 1 | |
| 6V-9509 | Plug | 1 | |
| 6V-9832 | Cap As | 1 | |
| 6V-9511 | Plug | 1 | |
| 6V-9833 | Cap As | 1 | |
| 6V-9512 | Plug | 1 | |
| 6V-9508 | Plug | 1 | |
| 6V-9829 | Cap As | 1 | |
Start By:
- Remove the counterweight. Refer to Disassembly and Assembly, "Counterweight - Remove and Install".
- Remove the pump drive. Refer to Disassembly and Assembly, "Pump Drive - Remove and Install".
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Drain the hydraulic fluid into a suitable container. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Show/hide table
Illustration 1 g01087572 - Disconnect hose assembly (3).
- Loosen clamps (5).
- Disconnect hose (4).
- Loosen clamp (1).
- Disconnect hose (2).
Show/hide table
Illustration 2 g01087573 - Disconnect hose assemblies (6), (7), and (8).
Show/hide table
Illustration 3 g01087574 - Install Tooling (A) in order to support piston and vane pump (10).
- Loosen bolt (9).
Show/hide table
Illustration 4 g01087575 - Remove bolts (11).
- Use Tooling (A) in order to remove piston and vane pump (10). The weight of piston and vane pump (10) is approximately
64 kg (140 lb) .
Caterpillar Information System:
AP-800D and BG-230D Asphalt Pavers Machine Systems Pump Control Valve (Generator) - Test and Adjust
446D Backhoe Loader Machine Systems Swing Cylinder - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Remove
446D Backhoe Loader Machine Systems Boom - Remove and Install
R2900G Load Haul Dump Machine Systems Seat - Install
R2900G Load Haul Dump Machine Systems Seat - Remove
C27 and C32 Engines Lubrication System
CB-334E and CB-335E Paving Compactors Plate Locations and Film Locations
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Steering Wheel - Remove and Install
2004/07/19 Expected Battery Life for the Computer Aided Earthmoving Systems (CAES) Display Batteries and the Minestar (Tope) Display Batteries {1401}
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Air Tank (Primary)
3126B and 3126E Truck Engines Electric Starting Motor
446D Backhoe Loader Machine Systems Piston and Vane Pump - Install
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Valve Mechanism
2004/07/26 A New Solenoid Control is Now Used {1265, 1276, 1408}
2004/12/01 Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
PS-150C Pneumatic Compactor Propel System Relief Valve (Flushing Valve) - Test and Adjust - Machines with Optional Flow Divider
446D Backhoe Loader Machine Systems Floorplate - Remove and Install
446D Backhoe Loader Machine Systems Stabilizer Cylinder - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Install
2004/08/02 Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320} 238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320}
R2900G Load Haul Dump Machine Systems Front Frame from Rear Frame - Separate
988H Wheel Loader Power Train Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate